will the 3.0 2wd t-100 1993 bolt to a g-54

youngguns4x4 · 06-29-2004, 02:06 PM

my buddy rolled his t-100 today and he has an 86 4wd were going to solid axle swap and the 22r is toasted. we were thinking of keeping the motor and rear axle ecu and what not. i'm pretty sure the w-56 will bolt up because they used that setup in some 4runner and trucks with v-6's but i wasn;t sure about the g-54

This ad is not displayed to registered members.
Register your free account today and become a member on Yotatech!

toy283 · 06-29-2004, 04:01 PM

No, it will not. If the 86 is 4wd, it's a G52 anyway but no matter. The only 4-cylinder truck tranny that will bolt up behind a V6 is the R151F turbo tranny used with the R150F V6 bellhousing. The bolt pattern between the tranny and bellhousing is unique for the R-series, not the same as the G and W series trannies. BTW, if you've ever seen a W series mated to a V6, I'd love to know where, they don't exist. Only R150F's came behind V6's.

jimbo74 · 06-29-2004, 04:38 PM

just take the engine and tranny out of the t100 and put it in the 1986 4x4

......

youngguns4x4 · 06-30-2004, 05:23 AM

thanks so then will the transfercase bolt up to the 151f tranny? and jima is a 2wd truck i'm pretty sure that he wants to keep 4wd

Highland Runner · 06-30-2004, 05:34 AM

toy283 is right. For questions like these see
http://www.marlincrawler.com/trans.html
They also have a good BBS that you can search or ask questions.

06-29-2004, 04:01 PM	#2 (permalink)
toy283 Contributing Member Join Date: Nov 2003 Location: Denver, CO, US Posts: 1,435	No, it will not. If the 86 is 4wd, it's a G52 anyway but no matter. The only 4-cylinder truck tranny that will bolt up behind a V6 is the R151F turbo tranny used with the R150F V6 bellhousing. The bolt pattern between the tranny and bellhousing is unique for the R-series, not the same as the G and W series trannies. BTW, if you've ever seen a W series mated to a V6, I'd love to know where, they don't exist. Only R150F's came behind V6's. __________________ Dave Currently own no Toyotas :( Last edited by toy283; 06-29-2004 at 04:03 PM.

06-30-2004, 05:34 AM	#5 (permalink)
Highland Runner Registered User Join Date: Jul 2002 Location: Highlands, NC Posts: 682	toy283 is right. For questions like these see http://www.marlincrawler.com/trans.html They also have a good BBS that you can search or ask questions. __________________ Chris Mine-94 SR5 4-Runner, 3.0, 4X4, Aisin Hubs, Yakima Load Warrior, 210k Miles \| Wifes-99 Limited

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rubicon Express Super Flex Joint, 1/4" Wall DOM, 100% Bolt-on 4Runner Lower Links	sschaefer3	Vendor Advertising	19	11-20-2006 07:12 AM
1993 Toyota 2WD Truck	1RADTOY	The Classifieds GraveYard	1	03-19-2006 01:47 PM
T-100 2wd Suspension Vs. 4wd?	elripster	99+ Tundra, 00+ Sequoia, 98+ Land Cruiser/LX470	2	08-27-2005 11:40 PM
Sonoran Steel/Stubbs Welding: 3rd Gen 4Runner PanHard DROP BAR, 100% Bolt-On	sschaefer3	95.5-2004 Tacomas & 96-2002 4Runners	0	07-30-2004 02:54 PM

06-29-2004, 04:38 PM	#3 (permalink)
jimbo74 Banned Join Date: Jan 2004 Location: Nor*Cal Posts: 6,582	just take the engine and tranny out of the t100 and put it in the 1986 4x4 ......

06-30-2004, 05:23 AM	#4 (permalink)
youngguns4x4 Registered User Join Date: May 2004 Posts: 38	thanks so then will the transfercase bolt up to the 151f tranny? and jima is a 2wd truck i'm pretty sure that he wants to keep 4wd