Why can't anyone here record good quality clips of exhaust?
02-02-2005, 03:16 PM
#1
Registered User
Thread Starter
Join Date: Aug 2004
Location: Downtown Seattle
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Why can't anyone here record good quality clips of exhaust?
Like this one:
Record stock: idle, slowly go through rpm range, some revs, then hammer down. Repeat with new exhaust. Pretty simple, IMO. Only thing I could have down better was a drive by with each. This gives a good baseline of stock volume compared, same camera, same location, etc.
http://www.imagestation.com/picture/...a/fa3f6c3a.mpg
RIGHT CLICK, SAVE AS...
May only work for Imagestation members, sorry.
I would LOVE to see one like that for a magnaflow and various flowmasters, etc.
If I ever get a muffler, YOU CAN BET I will do another one just like that.
Record stock: idle, slowly go through rpm range, some revs, then hammer down. Repeat with new exhaust. Pretty simple, IMO. Only thing I could have down better was a drive by with each. This gives a good baseline of stock volume compared, same camera, same location, etc.
http://www.imagestation.com/picture/...a/fa3f6c3a.mpg
RIGHT CLICK, SAVE AS...
May only work for Imagestation members, sorry.
I would LOVE to see one like that for a magnaflow and various flowmasters, etc.
If I ever get a muffler, YOU CAN BET I will do another one just like that.
02-02-2005, 04:06 PM
#5
Contributing Member
Join Date: Jan 2003
Location: Fairfax, VA
Posts: 933
Likes: 0
Received 0 Likes
on
0 Posts
02-02-2005, 04:10 PM
#7
Contributing Member
Join Date: Jan 2004
Location: Whitehorse, Yukon
Posts: 3,587
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by anestech*
If I ever get a muffler, YOU CAN BET I will do another one just like that.
If you don't like it, hack it off, stick on another, and sell the old one.
People have a harder time buying a muffler than they do a truck it seems. Something isn't right there.
Trending Topics
02-02-2005, 04:16 PM
#8
Registered User
Thread Starter
Join Date: Aug 2004
Location: Downtown Seattle
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Scofco
They aren't expensive... just get one.
If you don't like it, hack it off, stick on another, and sell the old one.
People have a harder time buying a muffler than they do a truck it seems. Something isn't right there.
If you don't like it, hack it off, stick on another, and sell the old one.
People have a harder time buying a muffler than they do a truck it seems. Something isn't right there.
I have seen Corey's exhaust site, but he only has one flowmaster clip, and it is of marginal quality.
And yes, 25 mbs is big, but to keep the good sound quality required it.
02-02-2005, 04:19 PM
#11
Contributing Member
Join Date: Jan 2003
Location: Houston, TX
Posts: 5,377
Likes: 0
Received 0 Likes
on
0 Posts
Welcome to the board anustech. nice sound clip, wish I would have thought about that before installing my magnaflow but I didn't. I also don't think I want to wind my 3.4 out like that just for a sound clip. I do like your second exhaust on that thing though. ps. you aren't a proctologist by chance are you?
Last edited by keisur; 02-02-2005 at 04:21 PM.
02-02-2005, 04:23 PM
#12
Contributing Member
Join Date: Jan 2004
Location: Whitehorse, Yukon
Posts: 3,587
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by keisur
I also don't think I want to wind my 3.4 out like that just for a sound clip.
I thought it was pretty nice of me to ever make a soundclip
I don't have any fancy digital sound recording equipment to make top notch clips. You can get the idea of how it sounds from my clip though.
02-02-2005, 07:21 PM
#17
Registered User
Thread Starter
Join Date: Aug 2004
Location: Downtown Seattle
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by keisur
Welcome to the board anustech. nice sound clip, wish I would have thought about that before installing my magnaflow but I didn't. I also don't think I want to wind my 3.4 out like that just for a sound clip. I do like your second exhaust on that thing though. ps. you aren't a proctologist by chance are you?
It is actually anestech, and I used to be an anesthesia technician. Currently a perfusion student though.
Actually, I am glad that I made that clip. In it, you can tell that the car isn't running right (there was a worse clip, but I edited that out), and I never would have noticed it had I not reved it out like that. Underload, you couldn't hear it. I put it on the dyno later, and found out it was running WAY lean. I hade it dyno tuned recently, now she purrs and makes 8 more RWHP, and 30+ more RWTQ (it was detonating and pulling timing right through the torque curve peak).
Sometimes a little abuse, goes a long way.
Last edited by anestech*; 02-02-2005 at 07:28 PM.
02-02-2005, 07:23 PM
#18
Registered User
Thread Starter
Join Date: Aug 2004
Location: Downtown Seattle
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 98Runner98
Gee, why don't we all sign up for imagestation just to hear a flippin exhaust clip.. 
Imagestation USED to allow anyone to access the site, member or not, then the cheap ˟˟˟˟ers changed their mind
EDIT: Here, if this will make you happy. Here's a short clip of my old jeep with Edelbrock headers, a Flowmaster 50 SUV with a turndown coming out of the muffler. http://members.cox.net/romara2/Pics/...UVturndown.WMV
It sounded WAY better with the 3" mandrel bent tailpipe and 4" tip I had, till I crushed it wheeling...
Last edited by anestech*; 02-02-2005 at 08:18 PM.
02-02-2005, 07:25 PM
#19
Registered User
Join Date: Jan 2005
Location: High Point, NC/School at NC State
Posts: 398
Likes: 0
Received 1 Like
on
1 Post
I'm rockin a glasspack on my 93 3.0. That's how I do it. Yeah.............
Seriously though, sounds really good. Real deep and throaty, with no rice.
Seriously though, sounds really good. Real deep and throaty, with no rice.
02-02-2005, 08:28 PM
#20
Registered User
Thread Starter
Join Date: Aug 2004
Location: Downtown Seattle
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
I shrunk it down to 6 mbs or so so I could put it up on my ISP space:
For those that care: http://members.cox.net/romara2/Pics/stockthengmmg.wmv
You should probably still right click, save as...
For those that care: http://members.cox.net/romara2/Pics/stockthengmmg.wmv
You should probably still right click, save as...
