Notices
95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

Tube Doors

Old 03-28-2003, 10:18 AM
  #1  
Registered User
Thread Starter
 
seafarinman's Avatar
 
Join Date: Jul 2002
Location: Thurston County WA State
Posts: 977
Likes: 0
Received 0 Likes on 0 Posts
Tube Doors

I was wondering if anyone out there has tube doors on their rig. I emailed Jeff at Badland Bumpers who is responsible for my trucks beautiful and strong sliders and front and rear tube bumpers. I have seen them manufactured for 3rd gen pickups by SW Tube Works. Anyhow, I think that they would certainly be the ticket for summer four wheeling. Jeff mentioned that they legally questionable at best. Anyone have any experience using these? I am mainly interested in Washington and California since these are my stomping grounds. Thanks for any experiences or opinions.
Rome

Old 03-28-2003, 10:20 AM
  #2  
Registered User
Thread Starter
 
seafarinman's Avatar
 
Join Date: Jul 2002
Location: Thurston County WA State
Posts: 977
Likes: 0
Received 0 Likes on 0 Posts
I hope that this pic is bigger..

Old 03-28-2003, 10:55 AM
  #3  
Co-Founder/Administrator
Staff
iTrader: (1)
 
Corey's Avatar
 
Join Date: May 2002
Location: Auburn, Washington
Posts: 32,242
Received 19 Likes on 15 Posts
Rome, I don't have any experience with them, but I have often looked at the above ones at the review for them.

They look to be very high quality, and if I had a 2 door truck I'd run them on trail rides during the summer.

Most of these can be fitted with a mirror of some sort.
I have seen a few rigs while at Sam's Club that had these on them in Auburn.
They may be part of a club, I don't know.

Jeff would surely be able to fab up a set of these for sure, and mount mirrors on them.
I'd call the State Patrol and see what they have to say about it, and if it's legal with mirrors on them.



They do look very cool, and a great way to watch a narrow trail if you are on one.
Old 03-28-2003, 11:26 AM
  #4  
Registered User
Thread Starter
 
seafarinman's Avatar
 
Join Date: Jul 2002
Location: Thurston County WA State
Posts: 977
Likes: 0
Received 0 Likes on 0 Posts
Corey,
I think that they would be way cool on the 4Runners as well. In fact I wanted a 4Runner at the time that I was looking for a 4X4, but (sighs) they were like $5K more than what I paid for my pickup. I am looking into getting some "raingutter" mounts installed on my cab so that I can move my roofrack to the cab when I remove the canopy.
Old 03-28-2003, 12:15 PM
  #5  
Contributing Member
 
yotafool's Avatar
 
Join Date: Feb 2003
Location: Kansas City, KS
Posts: 586
Likes: 0
Received 0 Likes on 0 Posts
dang, those are some nice lookin trucks, i havent seen that b4 on toyota pickups but have on chevy pickups, wish i could help
Old 03-28-2003, 12:19 PM
  #6  
Contributing Member
 
Robinhood150's Avatar
 
Join Date: May 2002
Location: Wandering around Phoenix
Posts: 6,033
Likes: 0
Received 3 Likes on 3 Posts
I think the general concensus on the boards have been as long as there are mirrors then it's OK. But nobody has replied with solid legal evidence for this. Do a google search for vehicle codes in wash and CA
Old 03-28-2003, 08:46 PM
  #7  
Registered User
 
jjdeneen's Avatar
 
Join Date: Jan 2003
Location: Lakewood, CA
Posts: 418
Likes: 0
Received 0 Likes on 0 Posts
those look super cool, how much do those things cost, and who makes them and are they available for a 1980's vintage toyota 4x4.....
Old 03-28-2003, 09:04 PM
  #8  
Contributing Member
 
Tacoma Dude's Avatar
 
Join Date: Mar 2003
Location: Orange County, CA
Posts: 8,345
Likes: 0
Received 0 Likes on 0 Posts
I know a few cops...
I'll ask the next time I see them
Old 03-28-2003, 09:11 PM
  #9  
Co-Founder/Administrator
Staff
iTrader: (1)
 
Corey's Avatar
 
Join Date: May 2002
Location: Auburn, Washington
Posts: 32,242
Received 19 Likes on 15 Posts
Originally posted by jjdeneen
those look super cool, how much do those things cost, and who makes them and are they available for a 1980's vintage toyota 4x4.....
JJ, I have a link to the maker of them, and the price is on the site in the URL above.
Old 03-28-2003, 10:22 PM
  #10  
Registered User
 
Salue's Avatar
 
Join Date: May 2002
Location: Washington
Posts: 306
Likes: 0
Received 0 Likes on 0 Posts
I hope that they are legal seeing that those would probably protect you more in an accident than those Jeep Wrangler soft doors would...

Salue
Old 03-28-2003, 10:24 PM
  #11  
Registered User
Thread Starter
 
seafarinman's Avatar
 
Join Date: Jul 2002
Location: Thurston County WA State
Posts: 977
Likes: 0
Received 0 Likes on 0 Posts
I am planning on ordering a set next month. They are $200 a set painted black. +$80 for powder coating. The quote that I got from Scott at SW Tube Works was $315 for a pair powdercoated and shipped to Washington State. A great deal if they are legal!
Old 03-29-2003, 12:20 AM
  #12  
Contributing Member
 
rixham's Avatar
 
Join Date: Dec 2002
Location: Fredneck, MD
Posts: 417
Likes: 0
Received 0 Likes on 0 Posts
WOW... that has got to be the longest sig I have ever seen. Anyway.. I agree. If I could drive my old Wrangler with no top or doors there should be no problem with this. The only thing they might say is that the jeep was designed to be driven with out the doors on and the Yota's were not. Just my $.02
Old 03-29-2003, 03:52 AM
  #13  
Contributing Member
 
dajabr's Avatar
 
Join Date: Jul 2002
Location: Charleston WV
Posts: 874
Likes: 0
Received 0 Likes on 0 Posts
In order to be legal there has to be a drivers side mirror, a latching mechanism, handle, and a threshold to keep things on the vehicle floor from falling out. The jeeps can go doorless becase they have the miror and threshold built into the body. And the latch and handle are only too keep the door from opening in motion, not needed if there's no door (like the jeep).
Old 03-31-2003, 08:25 PM
  #14  
Contributing Member
 
yotafool's Avatar
 
Join Date: Feb 2003
Location: Kansas City, KS
Posts: 586
Likes: 0
Received 0 Likes on 0 Posts
here are some tube doors http://www.aor4x4.com/nerfbars.htm
Old 04-01-2003, 08:03 AM
  #15  
Registered User
 
Shane's Avatar
 
Join Date: May 2002
Location: Seattle
Posts: 3,000
Likes: 0
Received 0 Likes on 0 Posts
These doors are not street legal in Washington state, Toyota trucks don't have a tub under the door just a flat floor. Reason Jeeps can get away with it is they have a 3-4" lip to keep crap from falling out, we don't have that and it's required by law for the safety of other drivers. You most likely won't be bothered about it unless you do something else to get their attention but be forewarned.
Originally posted by yotafool
here are some tube doors http://www.aor4x4.com/nerfbars.htm
Don't bother, I'm about to file a claim with my card company against these guys cause they couldn't ship out a simple u-bolt flip kit and some shock mounts in a reasonable time frame. They're also impossible to get a hold of and charge you immediately when you order instead of when it ships.
Old 04-01-2003, 08:18 AM
  #16  
Contributing Member
 
dajabr's Avatar
 
Join Date: Jul 2002
Location: Charleston WV
Posts: 874
Likes: 0
Received 0 Likes on 0 Posts
Was talking with Scott about welding a panel to the bottom of the doors, would seal with the weather stip and act as this threshold. Will post the pic I sent him as soon as montypics is back up...
Old 04-01-2003, 12:01 PM
  #17  
Registered User
Thread Starter
 
seafarinman's Avatar
 
Join Date: Jul 2002
Location: Thurston County WA State
Posts: 977
Likes: 0
Received 0 Likes on 0 Posts
dajabr,
If there is a way to make the tube doors street legal, so much the better! Guess that I will wait to order mine then.
Old 04-01-2003, 12:26 PM
  #18  
Contributing Member
 
dajabr's Avatar
 
Join Date: Jul 2002
Location: Charleston WV
Posts: 874
Likes: 0
Received 0 Likes on 0 Posts
I though sea faring men didn't carry a lot of baggage... that signature is half of this thread! :pat:
I'll post as soon as I hear from scott, but the issue is cold at this point, or he has been too busy doing it to email me. Last from him was 2/6... I'm open to any thing if you want something added we would be more than happy to accommodate

Last edited by dajabr; 04-01-2003 at 12:29 PM.
Old 04-01-2003, 07:41 PM
  #19  
Registered User
 
SW Tube Works's Avatar
 
Join Date: Apr 2003
Location: Paradise Ca
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Hey all this forum was brought to my attention today thought maybe I could help a little.

The doors I first built were just a last minute thing for a Rubicon trip because I dint have the time to cut half doors people started buggin me to build them some and here we are.
I own a fab shop in Ca. and mainly do buisiness in the heavy equipment industry.

Now as far as the exact legality of the doors go it varies from state to state I do no that you have to have mirrors and a latch as stated above .
I have talked to a couple different officers with the CHP here in Ca and they told me that the lip in the floor is somewhat of an issue but that they were not concerned with it and would not pull you over for it .
That it is up to the discetion of the individual officer and that most off road rigs were a rolling violation any how, here is an example he gave me and this is from memory and is not exactly acurate but you will get the picture.
Youre tail pipe cannot piont straight out the side of the truck if its over 20" from the ground and below 6 feet, so if youre truck has the stock tail pipe and you have 33" tires and some kind of a lift youre illegal.
My piont is if they wana give you a ticket they will find a reason

I do no that I've sold and or givin away around forty pairs of doors in Calafornia,Arizona,Colorado,Tennessee,Kentucky,Vir gina,Utah and New Hamshire and no one has ben issued a tickett for running them yet .
I no that they are bad ass off road and that I hate putting my real doors back on in the winter

hope I've answered some of youre Questions and din't ramble to much
Thanks Scott
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
1uzRunner
84-85 Trucks & 4Runners (Build-Up Section)
63
11-10-2018 03:58 PM
runnermedic
95.5-2004 Tacomas & 96-2002 4Runners
13
09-21-2015 05:20 PM
old87yota
86-95 Trucks & 4Runners
20
09-09-2015 12:39 PM
Dparr2ndgen
95.5-2004 Tacomas & 96-2002 4Runners
0
09-08-2015 01:06 PM
dguzzi
99+ Tundra, 00+ Sequoia, 98+ Land Cruiser/LX470
0
09-03-2015 08:48 AM


Thread Tools
Search this Thread
Quick Reply: Tube Doors



All times are GMT -8. The time now is 11:52 AM.