99 4Runner shakes when taking off in 1st Gear and Reverse- Suggestions?
10-23-2014, 11:18 AM
#1
Registered User
Thread Starter
Join Date: Oct 2014
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
99 4Runner shakes when taking off in 1st Gear and Reverse- Suggestions?
I have a 99 4runner that shakes only on takeoff in first gear and reverse.new mounts,shocks,anyone else have this problem?
10-30-2014, 05:40 PM
#2
Registered User
Join Date: Apr 2006
Location: San Antonio, tx
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
I know that first and reverse share the same clutch band. Mine takes about half of a second to shift into either from park or neutral. I was once younger and way dumber than I am now.
I'm pretty sure it's the deepest band and drum in the transmission case. You might wanna give that a look.
I'm pretty sure it's the deepest band and drum in the transmission case. You might wanna give that a look.
11-04-2014, 03:38 PM
#3
Registered User
Join Date: Jan 2010
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Okay, if you hold down the brake pedal firmly and accelerate the engine to about 1500rpm IN GEAR, does it still shake? Doing this will help you a lot as far as trying to figure out whether this is an engine problem or a transmission/driveline problem. If it shakes without the vehicle even moving, then you more than likely have a misfire issue.
11-06-2014, 06:31 PM
#4
Registered User
Join Date: Apr 2006
Location: San Antonio, tx
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Damn. I thought there would be more here. A misfire would also come up at cruising speed, probably going uphill. I once had a tough to diagnose misfire on a mustang with a 3.0. Turned out to be a cracked plug. It would only do it just above 45 after the torque convertor locked up.
Thread
Thread Starter
Forum
Replies
Last Post
voiddweller
86-95 Trucks & 4Runners (Build-Up Section)
19
05-02-2016 09:10 PM
YotaGreenhorn
95.5-2004 Tacomas & 96-2002 4Runners
3
06-27-2015 07:00 AM
saphirekosmos
Newbie Tech Section
1
06-22-2015 10:26 AM
