Timing belt broke/tapping noise now.1998 tacoma V6
#1
Registered User
Thread Starter
Join Date: Oct 2005
Location: Calera Alabama
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Timing belt broke/tapping noise now.1998 tacoma V6
Driving home tuesday night ,truck started losing power and tapping.Got towed home.Changed timing belt,water pump,tensioner,cam seals and crank seal.Timed it by the marks.Starts and runs but has this tapping/knocking from the engine.Can hear it through the oil pan and the valve cover with a stethoscope. PLEASE HELP.
#2
Contributing Member
Originally Posted by jimtanner
Driving home tuesday night ,truck started losing power and tapping.Got towed home.Changed timing belt,water pump,tensioner,cam seals and crank seal.Timed it by the marks.Starts and runs but has this tapping/knocking from the engine.Can hear it through the oil pan and the valve cover with a stethoscope. PLEASE HELP.
Remove the timing cover and recheck all the alignment marks.
#3
Registered User
Thread Starter
Join Date: Oct 2005
Location: Calera Alabama
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Jamie.Thanks for the reply.Before I got your post I was checking the Marks and they were off a little even though they were perfect when I put the belt on.WHY did this happen????????
Thread
Thread Starter
Forum
Replies
Last Post
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
07-06-2015 01:20 PM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
07-04-2015 12:15 PM
B. Graves
95.5-2004 Tacomas & 96-2002 4Runners
4
07-03-2015 04:10 AM