Bumpin' Yota

Well I JUST got done replacing the #2 and #3 relay on the 4 relay board on my 2nd gen thinking that the back window down relay was shot.

No avail. The GDPOFS still wont roll down...

I need to know what relays 1, 2, and 4 do. This is REALLY pissing me off.

Do all the relays share the same ground???

waskillywabbit

iTrader: (-1)

I know the feeling. Put the dynamite down and walk away from the 4Runner for a while. Come back to it later.

I have no idea what those relays do but I did stay at a Holiday Inn Express last night.

Robinhood150

Have you seen Roger Browns writeup?

payyourtoll

took me a second but I'm with you now

Bumpin' Yota

LoL thanks for the post. I did just that, took a break to clean up (cussing the entire time.) Came back out, stuck the key in the ignition turned it to ACC and I hear a single 'CLICK' from the back.

I thought, "Hmmm the full time on relay is on, and I dont remember hearing it last time...."

So I try the switch - OMG IT WORKS!!!


Possible morals of the story: either cussing at my truck makes it work, my truck is possesed, or for some wierd reason the main relay that supplies power (or ground) to the rest of the relays didnt turn on the first time.

Now she works (the switch up front.)

BTW all rear window switches are merely ground interrupts. Oddly enough there is no power going to the roll up side of the key switch on the tailgate. Im thinking the retards that rewired the rear end after my first collision ooooh-so-long ago didn't wire up that wire....

Bumpin' Yota

Im not sure, is it in the tech section here, or on his own website?

waskillywabbit

iTrader: (-1)

Pretacopower

Motivated by this, I went out and tried this on my truck.
The damn wires were still all cut up and the thing still overheats. Guess it doesn't work for everybody

Cebby

http://www.4crawler.com/4x4/CheapTri...arWindow.shtml

Robinhood150

It's in the toyota bible: http://4crawler.com/4x4/CheapTricks/RearWindow.shtml

calrockx

good job getting it to work.


and i don't know what it says about for me for knowing what that stands for, but it's funny

Robinhood150

Hey! He was talking to me, Cebby!

I'm gettin' DSL...

Cebby

I beat you by 2 minutes...

Bumpin' Yota

Dont mind my last post of GDPOFS acronym - just a case of my typing tourette's syndrom which has been induced by my truck. lol

(Gall Damn Piece of Forking Sheit - only I used explitives at the time....)

Cussing like a drunken sailor must also work on car alarm remotes too...LOL

Bumpin' Yota

Yup got that site bookmarked. He explains the 1st gen circuit board well but the 2nd gen only said that relay #3 was the down relay. Which I question after looking at the 2nd gen wiring diagram for a few hours...lol

I think it's write up time I took a ton of pictures....