Notices
95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

SC'd 5VZ-FE experiences anybody?

Thread Tools
 
Search this Thread
 
Old 05-22-2007, 06:51 PM
  #1  
Registered User
Thread Starter
 
apalmer1's Avatar
 
Join Date: Nov 2006
Location: Bend, OR.
Posts: 652
Likes: 0
Received 0 Likes on 0 Posts
SC'd 5VZ-FE experiences anybody?

Im going to supercharge my tacoma this summer, with a TRD supercharger and an upgraded fuel pump, then hopefully a URD 7th injector kit and a pulley tensioner then upgraded injectors yada yada yada.

From what ive heard the TRD superchargers are realatively durable offroad. I was just wondering if or what problems people have had with the SC's relating to mud and water and dirt splashing up ontop of the intake manifold, or just around the body of the unit itself. Any stories/warnings comments concearns or advice would be appreciated.
Old 05-22-2007, 07:23 PM
  #2  
Contributing Member
 
kevin444's Avatar
 
Join Date: Jun 2004
Posts: 1,813
Likes: 0
Received 0 Likes on 0 Posts
Its just as reliable as if you were n/a the only thing you might worry is just the supercharger belt. Keep it dry and clean and you should be good.
Old 05-22-2007, 07:41 PM
  #3  
Registered User
Thread Starter
 
apalmer1's Avatar
 
Join Date: Nov 2006
Location: Bend, OR.
Posts: 652
Likes: 0
Received 0 Likes on 0 Posts
Well that would be resolved if i just cleaned it thuroughly after each outing in which it saw mud/dirt i hope.
Old 05-23-2007, 04:09 AM
  #4  
Contributing Member
 
mt_goat's Avatar
 
Join Date: Nov 2002
Location: Oklahoma State
Posts: 10,666
Likes: 0
Received 5 Likes on 5 Posts
Carry a spare belt for sure.
Old 05-24-2007, 07:43 PM
  #5  
Registered User
Thread Starter
 
apalmer1's Avatar
 
Join Date: Nov 2006
Location: Bend, OR.
Posts: 652
Likes: 0
Received 0 Likes on 0 Posts
what about overheating issues? has anybody tried to retrofit a small intercooler?
Old 05-25-2007, 04:00 AM
  #6  
Contributing Member
 
mt_goat's Avatar
 
Join Date: Nov 2002
Location: Oklahoma State
Posts: 10,666
Likes: 0
Received 5 Likes on 5 Posts
An intercooler for the SCer? The TRD SCer design doesn't lend itself to getting intercooler piping in there the way its bolted right to the intake. It would take such a custom design that you might as well put on a turbo. What most do is water/methanol injection to cool the intake temps, like the Aquamist or URD kits. http://www.urdusa.com/index.php?cPat...fces4s2jop22d4
Old 05-25-2007, 10:07 AM
  #7  
Registered User
 
Weasy2k's Avatar
 
Join Date: Jun 2003
Location: Vancouver, Canada
Posts: 943
Likes: 0
Received 0 Likes on 0 Posts
If you are just going to keep the sc at the stock boost setup a fuel upgrade kit and piggyback is the best thing you can do
Old 01-21-2009, 12:57 PM
  #8  
Registered User
 
64-Hurricane's Avatar
 
Join Date: Nov 2008
Location: Minnesota
Posts: 58
Likes: 0
Received 0 Likes on 0 Posts
Can someone explain to me why Toyota does not condone the use of their Charger with a manual tranny behind the 5vz-fe? Is it a transmission durability issue, or a engine/charger durability issue?
Old 01-23-2009, 06:16 AM
  #9  
Contributing Member
 
turboale's Avatar
 
Join Date: Jun 2002
Location: Brooklyn, NY
Posts: 4,868
Likes: 0
Received 0 Likes on 0 Posts
Shouldn't be seeing as the S/C can eat Autos as well... I have never heard that..? Not saying its not true but has anyone else heard this about an S/C on a manual? I know its possible and one guy who is quite into modding and tuning his s/c'd manual taco. Search around here and see if you can get in touch with him and see if there are any weak links in the trans. He has quite a setup and would be a good benchmark...
Old 01-23-2009, 06:47 AM
  #10  
Contributing Member
 
mt_goat's Avatar
 
Join Date: Nov 2002
Location: Oklahoma State
Posts: 10,666
Likes: 0
Received 5 Likes on 5 Posts
Originally Posted by turboale
Shouldn't be seeing as the S/C can eat Autos as well... I have never heard that..? Not saying its not true but has anyone else heard this about an S/C on a manual? I know its possible and one guy who is quite into modding and tuning his s/c'd manual taco. Search around here and see if you can get in touch with him and see if there are any weak links in the trans. He has quite a setup and would be a good benchmark...
I've never heard that either. The one thing I have heard is that the manual guys are more likely to snap a SCer belt because the tension on the belt changes more rapidly with a manual. During shifts the rpms change a lot more than the autos and the idler pulley design on the TRD dynamic tensioner allows the belt to slip off and snag or bind. But there is a better idler pulley you can get from URD that has sides that keep the belt from slipping off during shifts. http://www.urdusa.com/product_info.p..._id=1260518496

Last edited by mt_goat; 01-23-2009 at 06:49 AM.
Old 01-23-2009, 07:24 AM
  #11  
Contributing Member
 
turboale's Avatar
 
Join Date: Jun 2002
Location: Brooklyn, NY
Posts: 4,868
Likes: 0
Received 0 Likes on 0 Posts
As far as reliability goes my rig has had the S/C for over 130,000 miles... has been wheeled quite frequently and has yet to really skip a beat. Most of those miles were when my buddy owned it but I know the trucks history quite well as the owner is a good friend of mine. The transmission is also original, without any vb mods. I'm also in the middle of a 1,400mi road trip and don't think twice. Its a bit on the thirsty side, but thats because I haven't quite splurged to get the URD fueling kit which is coming. It does have bigger injectors and the smaller pulley (9psi) but the previous owner went with an S-AFC unit which is pretty much a band-aid and works but doesn't have quite as much control as I would like. I'm currently on the hunt for a wide-band A/F meter and will go from there.

Last edited by turboale; 01-23-2009 at 07:31 AM.
Old 01-23-2009, 07:50 AM
  #12  
Registered User
 
okie81's Avatar
 
Join Date: Aug 2008
Location: Nor, CAL
Posts: 1,816
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by mt_goat
I've never heard that either. The one thing I have heard is that the manual guys are more likely to snap a SCer belt because the tension on the belt changes more rapidly with a manual. During shifts the rpms change a lot more than the autos and the idler pulley design on the TRD dynamic tensioner allows the belt to slip off and snag or bind. But there is a better idler pulley you can get from URD that has sides that keep the belt from slipping off during shifts. http://www.urdusa.com/product_info.p..._id=1260518496
Can't say much for Toyota, but S/C belt snaps occur a lot on big cubic inch motors, (muscle cars, hot rods, etc.). In manual tranny setups, they usually add a rev limiter to combat that problem.
Old 01-23-2009, 08:42 AM
  #13  
Registered User
 
thewjsand's Avatar
 
Join Date: Jul 2006
Location: Minneapolis MN
Posts: 241
Likes: 0
Received 0 Likes on 0 Posts
I had a SC on my 5sp 4runner for 70,000 miles with no transmission issues at all. In fact i had no SC issues at all.

I would do it again but i would do the fuel mods as well.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ashamsuddin
General Vehicle Related Topics (Non Year Related)
17
01-13-2023 03:17 AM
primordialbeast117
86-95 Trucks & 4Runners
11
12-19-2015 12:23 PM
Iceman4193
86-95 Trucks & 4Runners
22
10-16-2015 10:50 AM
mreagen
86-95 Trucks & 4Runners
10
10-05-2015 04:27 PM
hiluxinargentina
86-95 Trucks & 4Runners
3
09-30-2015 05:51 PM



Quick Reply: SC'd 5VZ-FE experiences anybody?



All times are GMT -8. The time now is 01:44 AM.