SAW rebuild tips? Please?
#1
Contributing Member
Thread Starter
Join Date: Dec 2003
Location: Way down in the hole...
Posts: 767
Likes: 0
Received 0 Likes
on
0 Posts
SAW rebuild tips? Please?
So I got what I hope was a great deal on a pair of race-runners that are due for service (thanks JBoy!). I've already looked at the PDF instructions, but I'm just looking for any tips/pointers from those of you who may have experience with the operation.
Thanks
Thanks
#2
Contributing Member
Join Date: Jul 2002
Location: Colorado
Posts: 1,358
Likes: 0
Received 0 Likes
on
0 Posts
#3
#6
Contributing Member
Thread Starter
Join Date: Dec 2003
Location: Way down in the hole...
Posts: 767
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Gadget
I also have a spare set of SAWs if anyone is look for any.
Gadget
Gadget
Gadget, where (generall, not trying to stalk or anythin) in maryland are you?
I'm wondering where you've gone for all your dyno testing and such.
back to the thread,,,
Jboy was nice enough to email me the baja taco info.
Just hoping for maximum advice/information before I do it (which won't be for a little while anyway, as Jboy doesn't ship until monday, and hawaii is a long way away).
#7
Registered User
Join Date: Jul 2003
Location: Hawaiian Islands
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
Yeah with that Parcel Post that usually takes 1 month although Postman always says 6 to 8 weeks. I really wanted to do this rebuild job myself but the time frame I had on a certain bill payment wouldn`t allow it. So you get all the FUN Ian.
Before you take them apart measure or mark where the ajuster is that way you can go back to that mark to speed up the lift and adjusting process. Starting from 0 is a lot of work to get everything lifted and leveled with each side. I`ll also send you a replacement nitro valve and when you do install these onto your truck install it with the valve facing in.
Before you take them apart measure or mark where the ajuster is that way you can go back to that mark to speed up the lift and adjusting process. Starting from 0 is a lot of work to get everything lifted and leveled with each side. I`ll also send you a replacement nitro valve and when you do install these onto your truck install it with the valve facing in.
Thread
Thread Starter
Forum
Replies
Last Post