Rim to fender lip distance with 2nd gen OME HD springs
10-03-2005, 10:19 AM
#1
Registered User
Thread Starter
Join Date: Aug 2005
Location: Lafayette IN
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Rim to fender lip distance with 2nd gen OME HD springs
I am looking at getting the option #2 kit from trdparts4u.com but I have a question about the rear springs. Right now I have stock springs with 2" spacers and am setting at 15 inches on the drivers side and 14-3/4 on the passenger side with an near empty tank of gas (go figure 
)
I dont want to install the springs and then find out I want to take them back out and ad the spacers also. If sombody with the HD OME springs could measure there fender to wheel lip distance I would really appreciate it. that way I will know if I should install the spacers also.
I measured with the stock 31x10.50-15's. I will be installing 32x11.50's on 15x8 3.75 backspacing wheels this friday.
) I dont want to install the springs and then find out I want to take them back out and ad the spacers also. If sombody with the HD OME springs could measure there fender to wheel lip distance I would really appreciate it. that way I will know if I should install the spacers also.
I measured with the stock 31x10.50-15's. I will be installing 32x11.50's on 15x8 3.75 backspacing wheels this friday.
Last edited by ThomasJ; 10-03-2005 at 11:50 AM.
10-03-2005, 08:21 PM
#6
Registered User
Thread Starter
Join Date: Aug 2005
Location: Lafayette IN
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by nrgetic99
Spill the beans...
Which wheel and tires did you settle on ?
David
Which wheel and tires did you settle on ?
David
Last edited by ThomasJ; 10-03-2005 at 08:44 PM.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
vanion2
99+ Tundra, 00+ Sequoia, 98+ Land Cruiser/LX470
2
07-29-2015 06:17 PM
Steezy96yota
86-95 Trucks & 4Runners (Build-Up Section)
1
07-06-2015 10:00 AM
