Rear taillight/front marker light issues.
#1
Registered User
Thread Starter
Join Date: Aug 2003
Location: Raleigh, NC
Posts: 825
Likes: 0
Received 0 Likes
on
0 Posts
Rear taillight/front marker light issues.
This is mainly a question for those of you on the board that are installer savvy, esp. in the realm of stereos and/or alarms.
I'm running an older Viper/Sidewinder 6500 remote start alarm in my 96' 4Runner. After removing my CD player and EQ, I have discovered that my taillights, interior lights, and front marker lights do not function. The switch on the stalk is functioning, as is the relay in the engine bay. When remote starting the car, the lights function (i.e. flash on and off ) but as soon as you depress the brake or turn the key, the lights cease to function. This symptom also applies to the interior lights, i.e. dash lights and controls. So I'm forced to think that it's related to the alarm and/or relays on the alarm that control the light flashing. Unfortunately, the relay pack on the alarm seems to be fine as well... I'm stumped. Any suggestions?
I'm running an older Viper/Sidewinder 6500 remote start alarm in my 96' 4Runner. After removing my CD player and EQ, I have discovered that my taillights, interior lights, and front marker lights do not function. The switch on the stalk is functioning, as is the relay in the engine bay. When remote starting the car, the lights function (i.e. flash on and off ) but as soon as you depress the brake or turn the key, the lights cease to function. This symptom also applies to the interior lights, i.e. dash lights and controls. So I'm forced to think that it's related to the alarm and/or relays on the alarm that control the light flashing. Unfortunately, the relay pack on the alarm seems to be fine as well... I'm stumped. Any suggestions?
#2
Contributing Member
Join Date: Apr 2003
Location: Raleigh NC
Posts: 1,579
Likes: 0
Received 0 Likes
on
0 Posts
drive it off a cliff
nice profile, who's truck might that be
Then there's the matter of a certain 4Runner in my driveway that needs an engine
Last edited by NCSU-4runner; 11-13-2003 at 12:52 PM.
#3
Registered User
Thread Starter
Join Date: Aug 2003
Location: Raleigh, NC
Posts: 825
Likes: 0
Received 0 Likes
on
0 Posts
nice profile, who's truck might that be
This is mainly a question for those of you on the board that are installer savvy, esp. in the realm of stereos and/or alarms.
#4
Contributing Member
Join Date: Jun 2002
Location: Brooklyn, NY
Posts: 4,868
Likes: 0
Received 0 Likes
on
0 Posts
Oh you boys....
you sound like an old bickering married couple...
Wish I could help you... I would pm cebby, he was an installer for a number of years and helped me out with my Clifford.
you sound like an old bickering married couple...
Wish I could help you... I would pm cebby, he was an installer for a number of years and helped me out with my Clifford.
#6
Registered User
Thread Starter
Join Date: Aug 2003
Location: Raleigh, NC
Posts: 825
Likes: 0
Received 0 Likes
on
0 Posts
The switch on the stalk is functioning, as is the relay in the engine bay. When remote starting the car, the lights function (i.e. flash
Pull the fuses in the engine bay. Sounds like you have a blown fuse.
Thread
Thread Starter
Forum
Replies
Last Post
ashersullivan88yota
86-95 Trucks & 4Runners
24
01-18-2022 05:37 PM
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
Johntom240
General Electrical & Lighting Related Topics
7
07-13-2015 12:18 AM