question about front 3rd gen lift install
#1
Registered User
Thread Starter
Join Date: Oct 2002
Location: San Diego
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
question about front 3rd gen lift install
So I got the rear part of my lift installed (2" cornfed spacers) and I am going to go after the front now tomorrow. I am installing 2.5" cornfed spacers. Rather than dealing with the spring compressor I am going to take the coils to a shop and have them do it for me. Here is my question, the trick to getting the coils out is to put a bottle jack upside down on the upper arm. Now can I unload that jack completely and take it around to the other side or does that upper a-arm need to stay in compression? The reason why is because I am going to be taking both coil packs out to take to the shop, not doing one at a time. Here is a picture as to what I am talking about.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
07-04-2015 12:15 PM