Post your axle code!
#42
Registered User
Originally Posted by servo_fan
Which table were you looking at? There are several out there and most of them are really meant for 1st and 2nd gen 4Runners, (and older trucks). I believe for 3rd gen 4Runners the following link is the most accurate, (again this link is also on the yotatech FAQ page). http://www.vibratesoftware.com/html_...ear_Ratios.htm
It goes by model code not by the axle code. If the door sticker says yours came with 225/75 from the factory then you are most likely running 3.909 gears and the 265s were added after it left the factory, (unless it was regeared at that time as well).
It goes by model code not by the axle code. If the door sticker says yours came with 225/75 from the factory then you are most likely running 3.909 gears and the 265s were added after it left the factory, (unless it was regeared at that time as well).
Thanks for th help.
#43
Registered User
Join Date: Jul 2004
Location: Sacramento, CA
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by r854rnr
Thanks for that link. That made things a little less broad. However, I have 265s of there now, w/ stock 16" rims. The spare is the same size. Is there any way to tell what came on my specific truck?
Thanks for th help.
Thanks for th help.
It may be best to use that link and check your gearing based on your model number. If the door jamb sticker says 225/75 then I would think that's how Toyota built it and it probably has 3.909 gears. The 265/70 tires were probably added sometime after final assembly.
#44
Registered User
Originally Posted by servo_fan
It may be best to use that link and check your gearing based on your model number. If the door jamb sticker says 225/75 then I would think that's how Toyota built it and it probably has 3.909 gears. The 265/70 tires were probably added sometime after final assembly.
Thanks for the help though.
#45
Registered User
Join Date: Jul 2004
Location: Sacramento, CA
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by r854rnr
Based on my model number, there are 3 possibilities. 4.10, 3.909 and 4.30. I'm guessing 3.9 is me, but I'm hoping 4.10 or 4.30 is it! I guess i'll have to get off my but and go do it the spin test way.
Thanks for the help though.
Thanks for the help though.
#51
Registered User
Join Date: Apr 2003
Location: Seattle
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
Way old thread resurrection...
Axel code G252 ==> 8", 4.56 gears, 2 pinion.
According to offroad.com and visual confirmation on my diff...I have 4 pinion. Difference btwn 2 and 4 pinion is the # of fins on the housing. 2 pinion = 3 fins...4 pinion = 4 fins. So my door jamb plate is labeled incorrectly. Anyone else have this issue?
Is either 2 or 4 pinion better or worse than the other?
According to offroad.com and visual confirmation on my diff...I have 4 pinion. Difference btwn 2 and 4 pinion is the # of fins on the housing. 2 pinion = 3 fins...4 pinion = 4 fins. So my door jamb plate is labeled incorrectly. Anyone else have this issue?
Is either 2 or 4 pinion better or worse than the other?
#55
Registered User
Join Date: Apr 2003
Location: Seattle
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
Don't think it was replaced. The previous original owner kept immaculate service records and there was nothing about it. I read somewhere that the door jamb plates were commonly misprinted. But its good to know about it at least.
#58
Banned - User requested
Join Date: Feb 2003
Location: earth
Posts: 3,496
Likes: 0
Received 0 Likes
on
0 Posts
Crux,
mine says A04A also, but, according to this site http://www.brian894x4.com/Gearratiosanddiffs.html we have 4:56
but this other site http://www.off-road.com/toyota/tech/other/4_axles.html says with the VIN starting with JT i have 3:556
im more lost now than before
mine says A04A also, but, according to this site http://www.brian894x4.com/Gearratiosanddiffs.html we have 4:56
but this other site http://www.off-road.com/toyota/tech/other/4_axles.html says with the VIN starting with JT i have 3:556
im more lost now than before