pics
#1
Contributing Member
Thread Starter
Join Date: May 2003
Location: the Netherlands
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
pics
Okay, I finally figured out (I think) how to publish some pics.
Here: http://nl.msnusers.com/yotapics/shoebox.msnw
Here: http://nl.msnusers.com/yotapics/shoebox.msnw
#4
Registered User
That's a nice coil setup! OK, here's my first barrage of questions...[list=1][*]Is your front end a 3 link setup? I thought your control arms would have been tubular - but it looks like you found something off another vehicle. [*]Have you had to alter it after the inital installation to get good highway handling, or did you get it right on the first try? [*]Did you get longer control arms in the back for that amount of lift? [*]Do you have any pics of your electric swaybar discos?[/list=1]
#5
Contributing Member
Thread Starter
Join Date: May 2003
Location: the Netherlands
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
1. Yes, its a 3 link setup. LJ70 Landcruiser
2. Second try. First time failed due to the fact that I hacked up the axlehousing and punt in londer driveschadts, giving 3 inch more track.
3. Nope. Only FJ80 coils and RS5000 shocks. And a slighly longer panhard bar. (If thats the proper word for that control arm)
4. I'll make some this afternoon and post them.
2. Second try. First time failed due to the fact that I hacked up the axlehousing and punt in londer driveschadts, giving 3 inch more track.
3. Nope. Only FJ80 coils and RS5000 shocks. And a slighly longer panhard bar. (If thats the proper word for that control arm)
4. I'll make some this afternoon and post them.
Thread
Thread Starter
Forum
Replies
Last Post
FS[SouthEast]: Brand new 26 mm. Downey torsion bars
HiLuxer
Axles - Suspensions - Tires - Wheels
2
09-09-2015 02:43 PM