part number needed
#1
part number needed
Ok, so the LOML wrecked my 4Runner and I am in the process of replacing parts of the front end. On the up side, it gives me a good excuse to replace the crappy stock bumper with something much better. Anyway, what I need is the part number for the little clip that mounts the bumper-grille-headlight filler (the long narrow piece that goes right under the headlight) to the end of the fender that comes underneath the running lights. Anyone have such obscure information at hand? It would be much appreciated!
#2
YotaTech Milestone-Two Millionth Post
welcome.
try www.toyodiy.com for stuff like that.
you will need your VIN ready for that site and you can narrow down what you need.
personally, i would have no clue what you are talking about BUT help out a little and give us a year of your vehicle as well as pics. we are very visually oriented here...at least i am.
try www.toyodiy.com for stuff like that.
you will need your VIN ready for that site and you can narrow down what you need.
personally, i would have no clue what you are talking about BUT help out a little and give us a year of your vehicle as well as pics. we are very visually oriented here...at least i am.
#3
more info
Stupid of me not to have included the details in my original post. It is a 1998 4Runner SR5. I have attached a picture of one side of the clip in question - this is the clip on the driver's side. The other side of the clip is very difficult to get a decent picture of.
Thread
Thread Starter
Forum
Replies
Last Post
94 Newbie
95.5-2004 Tacomas & 96-2002 4Runners
2
07-06-2015 04:23 AM
TheManOutside
95.5-2004 Tacomas & 96-2002 4Runners
0
06-18-2015 03:32 PM