Localmotion

I installed my OME 881s and got about 3 inches of lift. IF you have 881s, did they sag? and if they did how long did they take to sag? The reason im asking is b/c my front is much higher than the rear now. looks like an old caddy...lol

Matt

jacksonpt

I got just under 3" from my 881s. They do seem to have sagged a bit, but I only really noticed it after I put my 33s on, which was about 40k miles after the 881s were installed. Sorry I can't be more help, but yes, they have sagged some. How quickly they sagged I can't really say.

GRNTACO

I had 881's and they gave me almost 3" with a 4 banger and settled to about 2". It took a month or so before they were settled.

Localmotion

awesome thanks a lot guys. Jackson, what did you use for the rear? i have the OME 906s in the rear and was hoping that the 881s would sag so it would be a more level ride...maybe wishful thinking?..LOL Anyways i might just have to go buy different rear springs.

matt

jacksonpt

I have 891s in the back. My rear is like 1.5" higher now than the front.

Localmotion

hmm....ill just wait a couple of weeks and see if it sags. Thank again Jackson

Matt

FilthyRich

did you use a diff drop?

Localmotion

i just ordered one from RB. But looks like im gonna have to get new rear coils and i have to replace my front shock bushings....damn. I broke my spring compressors so looks like im gonna have to pay to get them done

FilthyRich

can you make it to richmond? if so, get your parts and call me. It won't be a problem to do it whenever you need it done. My garage is built and my wedding plans are DONE

calg3

If you want your OME's to sag a little sooner mount up an ARB or TJM bumper

jacksonpt

I am NOT using a diff drop.

Localmotion

Wedding plans?? congrats man! I definately would like your help. Ill let you know when.

Thanks

Matt

FilthyRich

yeah April 30th (nerves) but I am excited...anyways, get your a$$ here and we can use my new wall mount spring compressor and car lift

MTL_4runner

Crap dude! I want your shop!
Need to figure out a way to sneak a lift into our garage without my wife knowing.

MTL_4runner

I think the 890s in the rear come out a little higher than level (maybe 1-1.25" more)
The 906s may come out exactly level (or maybe 0.5" more max), but it may take a while.

snwbrdpunk16

I've got bens (GRNTACO) old 881's on my 4runner now and i only get 1.5 inches of lift, But i also put a 1.5" lifting spacer on, so no my 4Runner sits at about 3 inches. So yes they will sag, especially if you wheel them.

WT

Hey want to go cheap what about air bags ($75.00 online shops) in the rear it help level you out and allow leveling when towing anything heavy I had good luck and was able to finaly test mine out a few weeks ago I hauled my motorcycle with my moto-tote on the back hitch with very little sag
Also if your in town and you boys need another set of hands let me know It wont take long to do the springs if you do plan to replace the rears and you don't need a compressor to do the rears.

Localmotion

Yea definately will give you a call. You can swing by and help me with my guages.....if eric doesnt mind

Matt

WT

Yeah I was going to ask if you ever got them in ... No problem let me know when you guys setup a date and If I'm free I shot over and get you done in no time