NO CLEARANCE after Valve Job 2.7 Help
#1
Registered User
Thread Starter
Join Date: Aug 2005
Location: Federick, CO
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
NO CLEARANCE after Valve Job 2.7 Help
Before I go back to machine shop to say WT Heck, Is it possible thatall my vaLves could be too tight ( no clearaance on any one. Stupid me didnt look at clearances upon disassembly< 16 shims at $10 a piece will suck.
I was thinking of buying one shim, the smallest possible to see if it would open up clearance. The head is still off. Would that effectthe clearance? I can't figure out how it would? HELP!!!
THANKS TOM
I was thinking of buying one shim, the smallest possible to see if it would open up clearance. The head is still off. Would that effectthe clearance? I can't figure out how it would? HELP!!!
THANKS TOM
#2
Registered User
Thread Starter
Join Date: Aug 2005
Location: Federick, CO
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
I called today, and of course the Toyota guy doesn't work today. Went to Toyota, of course they don't have 2.5 mm shim in stock.
More I think of it, the more I think that the valve stems are higher due putting in new seats. My opinions?
Should have bought one on Ebay !!!
More I think of it, the more I think that the valve stems are higher due putting in new seats. My opinions?
Should have bought one on Ebay !!!
Thread
Thread Starter
Forum
Replies
Last Post
foampile
03+ 4Runner/GX470, & 05+ Tacomas
1
12-18-2022 01:29 PM
Blamalam
86-95 Trucks & 4Runners
22
03-12-2022 07:34 AM
he's gone
95.5-2004 Tacomas & 96-2002 4Runners
7
12-03-2019 07:08 AM
montanatruck
86-95 Trucks & 4Runners
15
02-26-2017 07:07 AM