New to to Site..
07-17-2005, 08:09 AM
#1
Registered User
Thread Starter
Join Date: Jul 2005
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
New to to Site..
Hey y'all new to this site just wanted to say whats up and introduce myself... I'm Bobby from Gloucester, VA and I drive a '85 Yota Pick-up [start AA group voice] HIIII BOBBY!!! [/Voice]... Any way here is my truck...
'85
Rebuilt 22R
35" Ground Hawgs
rattle can primer paint and Half @ss Bondo job...
5.29 Gears
'85
Rebuilt 22R
35" Ground Hawgs
rattle can primer paint and Half @ss Bondo job...
5.29 Gears
Last edited by rswords; 07-17-2005 at 08:10 AM.
07-17-2005, 08:19 AM
#4
Registered User
Thread Starter
Join Date: Jul 2005
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
After it was painted I could not stand all the different colors... Is is really a half @ss job I sanded and Bondoed the rust bubbles and painted it in about 2 hours in my drive way.... Didn't even wash it or pull off the pin strip!!! I'll do it right one of these days. For the time being I just wanted it all one color. As for the Ground Hawgs I guess they are Okay.. They rock in the Mud but they a Bias Ply so they beat you up pretty good on the road and they are heavy. I have a intake, Weber Carb, and Header on the truck but even with that and the 5.29's they don't turn over as fast as I would like them, I guess I also need to clarify that I'm a mudder... Out here we don't get much for rock, just deep nasty evil mud, although I have went to the west part of the state a few times and went trail ridding, nothing crazy I was in my '98 Z-71 but it was fun, I have yet to get this truck out there.
I could not stand all the different colors... Is is really a half @ss job I sanded and Bondoed the rust bubbles and painted it in about 2 hours in my drive way.... Didn't even wash it or pull off the pin strip!!! I'll do it right one of these days. For the time being I just wanted it all one color. As for the Ground Hawgs I guess they are Okay.. They rock in the Mud but they a Bias Ply so they beat you up pretty good on the road and they are heavy. I have a intake, Weber Carb, and Header on the truck but even with that and the 5.29's they don't turn over as fast as I would like them, I guess I also need to clarify that I'm a mudder... Out here we don't get much for rock, just deep nasty evil mud, although I have went to the west part of the state a few times and went trail ridding, nothing crazy I was in my '98 Z-71 but it was fun, I have yet to get this truck out there.
07-17-2005, 03:56 PM
#7
Registered User
Thread Starter
Join Date: Jul 2005
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ugabulldog
cool truck, I always liked the saw blades wheels on the old 4x4's.
Trending Topics
Alotta knowledge here man...so if ya have any problems or ideas or concerns then post it and it will be answered
07-17-2005, 04:52 PM
#9
Contributing Member
Join Date: Feb 2005
Location: Southlake/Lubbock, Texas
Posts: 1,982
Likes: 0
Received 0 Likes
on
0 Posts
ya like he said, there is a TON of info here and great people...although i will give you some advice that i dont always remember- search. It will save you from being flamed for asking basic questions 
Also, check out the faq, tech write-ups, and the other sub forums if you havent already...VERY COOL
Also, check out the faq, tech write-ups, and the other sub forums if you havent already...VERY COOL
07-17-2005, 06:18 PM
#11
Registered User
Thread Starter
Join Date: Jul 2005
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Thanks... I have some Yota experiance but mostly Chevy and Jeep knowledge. All my buddys have always had Yotas and I had to give in. Got this one for a deal I could not turn down.
Thread
Thread Starter
Forum
Replies
Last Post
Ms.Yoter
General Vehicle Related Topics (Non Year Related)
0
07-15-2012 01:59 PM
