Need steps to program Securikey+
10-22-2003, 06:36 PM
#1
Registered User
Thread Starter
Join Date: Oct 2003
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Need steps to program Securikey+
1997 4Runner with port installed option that is installed by Toyota at the port in Houston.
It has the remote head key, not a seperate remote.
Buttons on remote are Lock, Unlock, and a green Option button. It is used to do different things like turning on the headlights or even a remote start. I have the operating manual but not the programming manual.
I am replacing a remote and need the steps to program it into the system.
It also has a red LED pushbutton valet switch on the dash. It is used to enter valet mode and I guess to program other options. Like passive arming.
FCC ID on back of remote is ELVAT6B.
Please post here or email me if you have the instructions.
Picture of Securikey+ remote headed key
It has the remote head key, not a seperate remote.
Buttons on remote are Lock, Unlock, and a green Option button. It is used to do different things like turning on the headlights or even a remote start. I have the operating manual but not the programming manual.
I am replacing a remote and need the steps to program it into the system.
It also has a red LED pushbutton valet switch on the dash. It is used to enter valet mode and I guess to program other options. Like passive arming.
FCC ID on back of remote is ELVAT6B.
Please post here or email me if you have the instructions.
Picture of Securikey+ remote headed key
Thread
Thread Starter
Forum
Replies
Last Post
hiluxinargentina
86-95 Trucks & 4Runners
0
09-30-2015 11:12 PM
Toys4parts
86-95 Trucks & 4Runners (Build-Up Section)
2
09-26-2015 01:56 PM
