Keggo

I've been wanting to get my truck lifted for quite a long time... I've been running 33's with no lift, but I want to get into more aggressive wheeling. I have new cv's on the way and want to do all my lifting and replacing over one weekend. I've been searching around and have been wondering some things.. so, this is my question to you guys; What all is absolutely needed and what are some other things that aren't necessary but are nice to have? Thanks in advance guys... and I just can't tell you how much yotatech has helped me since I first joined! Thanks again!

Here are the things I'm thinking... If I've missed anything please let me know!:

REAR:

FZJ80 rear coils (long side... where can I buy two long sides?)
New, longer shocks
Extended brake lines

Front:
1.5" BJ Spacers
New Shocks
along with cranking my torsion bars...
Manual hubs
low profile bumpstops

While installing all this stuff, I'll be sure to snap pics and create a write up with a full list (with all your guys' help) of materials and items needed.

99_Runner

RobT2k

If you use the ball joint spacers up front, you won't have to crank your torsion bars. Actually you'll want them turned down and softened, so they can actually flex while you wheel.

Like Marc's here, and he's running 33's now with the same lift-