Making my own shackle hangers
#1
Registered User
Thread Starter
Join Date: Sep 2003
Location: Memphis, TN
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Making my own shackle hangers
The other day i was looking at steve schaefer's (Sp?) website and saw the pics of the shackle hangers he makes. They looked very nice and well made but they were just a little too expensive for me and my college budget. I also remember seeing what seems to be the same shackle part that steve uses on the rockstomper.com website for $20 a piece. I was wondering if it would be a good idea to build some of my own by using the hanger part from rockstomper and puttin it in 1.5 OD square tube that is 1/4" thick making a 1" ID which is the same width as the hanger piece. I would also leave exrta material pass the actual hanger to add a gusset and i would also use the dactory hitch bolts as well. I am no master fabricator nor certified but i did take a welding class a year go at some community college and have welded all the suspension hangers on my previous 84 4runner and they have held up just fine.
Thread
Thread Starter
Forum
Replies
Last Post
Flying91
86-95 Trucks & 4Runners (Build-Up Section)
45
04-11-2024 04:39 PM