Lift with 1/4 top out spacer

lbrunner · 07-26-2004, 09:15 PM

How much lift can I expect with a 1/4 Rev tek top out spacer? Did a search but did not find anything. It will be combined with OME Med duty coils.
Thanks in advance!

r0cky · 07-27-2004, 12:38 AM

bump.

ask fourunnabilly

lbrunner · 07-27-2004, 04:35 AM

Quote:

Originally Posted by r0cky

bump.

ask fourunnabilly

Thanks for the bump! I thought about him but he has a 4th gen so I was hoping for a response from a 3rd gen with just this spacer and OME. Some, like steve S is running stock coils and a combo of spacers... I think, got to look again

Well, looks like steve is running a 1.5 spacer and a rev tek 1/4 top out to get a total of 2.00 so I hope it will give a .5. Maybe I will pm him if he doesn't chime in.

TStango · 07-27-2004, 05:07 AM

Quote:

Originally Posted by lbrunner

Thanks for the bump! I thought about him but he has a 4th gen so I was hoping for a response from a 3rd gen with just this spacer and OME. Some, like steve S is running stock coils and a combo of spacers... I think, got to look again

Well, looks like steve is running a 1.5 spacer and a rev tek 1/4 top out to get a total of 2.00 so I hope it will give a .5. Maybe I will pm him if he doesn't chime in.

.5" is about right. I got about .75" of lift when I added the top spacer combined with an OME trimpacker.

Jonathan · 07-27-2004, 06:09 AM

Try Ryan (RTDawg's) if I'm not mistaking I think he is running those on his setup.

lbrunner · 07-28-2004, 12:48 AM

Thanks for the info! I should be all set. I should level me out. I just have to find out if I need longer studs for the spacer. I thought I read somewhere that rev-tek includes this in some of their kits. Maybe just bigger spacer kits. We'll see!

07-26-2004, 09:15 PM	#1 (permalink)
lbrunner Registered User Join Date: Oct 2003 Posts: 104	Lift with 1/4 top out spacer How much lift can I expect with a 1/4 Rev tek top out spacer? Did a search but did not find anything. It will be combined with OME Med duty coils. Thanks in advance!

07-27-2004, 06:09 AM	#5 (permalink)
Jonathan Contributing Member Join Date: Dec 2002 Location: Greenville, South Carolina Posts: 1,745	Try Ryan (RTDawg's) if I'm not mistaking I think he is running those on his setup. __________________ 1996 Black 4Runner V6 5 speed 4X4\| Retrofitted E-Locker\| SAW's\| LC coils and Doetschtech shocks\| ATS arms \| 285 Goodyear MTR's\|TJM T-15 With Warn M8000\|Retrofitted Toyota Hood Scoop\| Stubbs Sliders\|Bushwacker Extend-A-Fender Flares\| Extended rear diff breather\| Uniden 510XL CB w/ 4 Ft. Firestik II Antenna\|Dynomax Super Turbo Muffler\|Black headlights and corners\| More to come... 2007 VW GTI 6 Speed

07-28-2004, 12:48 AM	#6 (permalink)
lbrunner Registered User Join Date: Oct 2003 Posts: 104	Thanks for the info! I should be all set. I should level me out. I just have to find out if I need longer studs for the spacer. I thought I read somewhere that rev-tek includes this in some of their kits. Maybe just bigger spacer kits. We'll see! Last edited by lbrunner : 07-28-2004 at 01:00 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Update on TOP SPACER for the Tundra TRD lift...	bamachem	95.5-2004 Tacomas & 96-2002 4Runners	1	07-28-2005 09:23 AM
Advice Needed: Would like to add top out spacer and/or coil spring spacer to OME	4Peanut	Offroad Tech	11	07-12-2005 06:55 AM
Removal of Top Out Spacer	ORB	Offroad Tech	7	06-29-2005 07:00 AM
spacer lift: topout extender vs preload spacer	Rishi	Offroad Tech	15	04-17-2005 05:18 PM

07-27-2004, 12:38 AM	#2 (permalink)
r0cky Banned Join Date: Oct 2003 Location: Texas Posts: 5,386	bump. ask fourunnabilly