Jump start with cables crossed now no power at all
#1
Registered User
Thread Starter
Join Date: Jan 2013
Location: San Diego
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Jump start with cables crossed now no power at all
Wife got a jump start on 96 4 cylinder 4Runner with cables crossed. Got a new battery and installed it. There is no power at all to the vehicle. Dome lights won't even come on. I assume it blew fuse or worse, but don't see anything that looks burned out or funny. Any ideas?
#5
Registered User
Thread Starter
Join Date: Jan 2013
Location: San Diego
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the ideas, is there a way to tell if the fusible link is burned out without taking the entire fuse box out? Strange but I don't have an 80 amp fuse, just a 100 amp one that's labled starter.
#6
Contributing Member
iTrader: (1)
Here's a writeup on how to swap your fusable link:
http://www.toyota-4runner.org/3rd-ge...ks-w-pics.html
Also, make sure your ground wires are all good. This should set you straight, no big deal.
http://www.toyota-4runner.org/3rd-ge...ks-w-pics.html
Also, make sure your ground wires are all good. This should set you straight, no big deal.
Last edited by 98SR54RUNNER; 01-16-2013 at 08:07 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Regency
General Electrical & Lighting Related Topics
20
01-03-2020 07:43 PM
voiddweller
86-95 Trucks & 4Runners (Build-Up Section)
19
05-02-2016 09:10 PM