Notices
95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

ISR for '96 3.4L done today

Thread Tools
 
Search this Thread
 
Old 08-02-2004, 09:46 PM
  #1  
Contributing Member
Thread Starter
 
BajaRunner's Avatar
 
Join Date: Apr 2004
Location: 5th Gen San Diegan, California
Posts: 7,122
Received 6 Likes on 4 Posts
ISR for '96 3.4L done today

Well, I was in the middle of changing my spark plugs when I realized that I had taken the entire intake system off of my engine. Instead of putting it back on stock, I jumped in my buddies car and headed on over to the hardware store and picked up:

(1) 1.5" PVC end cap
(1) 1" PVC end cap
(1) .5" PVC end cap

(2) Hose barbs
and some fuel line

I followed the write up by "96 4Runner"...and it was very simple, Im suprised not everyone has done this mod!! It was easier than doing the deckplate in my opinion.

What I noticed off the bat was the slightly deeper tone to my exhaust at low RPMs and a louder throaty sound when gunning it. I unfortuently changed my sparkplugs and did the ISR mod at the same time, so I dont know which gave me more performance. After these upgrades, I noticed much stronger acceleration, and a much "punchier" feel to the gas pedal. Plus, the sound is great.

The only problem I ran into was getting the .5" end cap into the smaller hole. I knocked it down there with a rubber mallet for a while, and had to stop due to the fact the main intake tube was starting to tear. Not too much of a big deal though. Everything else went very smooth.
Old 08-02-2004, 10:11 PM
  #2  
Banned
 
jimbo74's Avatar
 
Join Date: Jan 2004
Location: Nor*Cal
Posts: 6,590
Likes: 0
Received 0 Likes on 0 Posts
but you ddint include pictures

there should be a rule that you cant post that you did a mod without pictures
Old 08-02-2004, 10:23 PM
  #3  
Contributing Member
Thread Starter
 
BajaRunner's Avatar
 
Join Date: Apr 2004
Location: 5th Gen San Diegan, California
Posts: 7,122
Received 6 Likes on 4 Posts
DOh!

Okay, well, I'll take a picture of what it looks like right now
Old 08-02-2004, 10:31 PM
  #4  
Contributing Member
Thread Starter
 
BajaRunner's Avatar
 
Join Date: Apr 2004
Location: 5th Gen San Diegan, California
Posts: 7,122
Received 6 Likes on 4 Posts
Here.

Old 08-03-2004, 01:15 AM
  #5  
Registered User
 
TOYJZX100's Avatar
 
Join Date: Jul 2004
Location: Hawaii
Posts: 85
Likes: 0
Received 0 Likes on 0 Posts
hehe, looks just like mine....except i put on a big K&N filter as well. i dont wheel so i have not water stuff to worry about. the sound difference is not very much until the airbox is removed, sounds nice with just the isr, powerful with the isr and no box
Old 08-03-2004, 06:07 AM
  #6  
Contributing Member
 
SLC Punk's Avatar
 
Join Date: Jul 2002
Location: SLC, UT
Posts: 5,862
Likes: 0
Received 0 Likes on 0 Posts
Did you get an increased "whistle" sound? When I did the ISR on my S/C'ed 3.4L I didn't notice any power gains, but I got this annoying whistle/whining sound..
Old 08-03-2004, 08:16 AM
  #7  
Contributing Member
Thread Starter
 
BajaRunner's Avatar
 
Join Date: Apr 2004
Location: 5th Gen San Diegan, California
Posts: 7,122
Received 6 Likes on 4 Posts
Well, I have the decplate with a K&N drop in...so the sound was increased qutie a bit.

SLC, nope no whistle. I have a pretty heavy "sucking" sound when I gas it though. I like that sound
Old 08-03-2004, 08:43 AM
  #8  
Registered User
 
midiwall's Avatar
 
Join Date: Dec 2002
Location: Seattleish, WA
Posts: 9,048
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by SLC Punk
Did you get an increased "whistle" sound? When I did the ISR on my S/C'ed 3.4L I didn't notice any power gains, but I got this annoying whistle/whining sound..
Do you still have the whistling? You didn't happen to knock off a vacuum line did you? There's one that sits below the throttle body that comes off a bit too easily. If that's pulled, then you'll get a nasty whistling sound. I did that myself and didn't find the cause for .. 13 months.
Old 08-03-2004, 08:51 AM
  #9  
Contributing Member
 
SLC Punk's Avatar
 
Join Date: Jul 2002
Location: SLC, UT
Posts: 5,862
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by midiwall
Do you still have the whistling? You didn't happen to knock off a vacuum line did you? There's one that sits below the throttle body that comes off a bit too easily. If that's pulled, then you'll get a nasty whistling sound. I did that myself and didn't find the cause for .. 13 months.
Hey Mark,

I only kept the ISR caps on for 3 days. When I removed the caps and put on the boxes, the whistling sound went away..
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Steven.m.paulk
86-95 Trucks & 4Runners
4
06-07-2020 10:45 AM
Dale Johnston
86-95 Trucks & 4Runners (Build-Up Section)
11
10-31-2015 10:22 PM
Flightguy
95.5-2004 Tacomas & 96-2002 4Runners
8
10-02-2015 05:34 PM
LCE_Performance
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
0
10-01-2015 01:03 PM
beltcutter
Newbie Tech Section
1
09-30-2015 06:14 AM



Quick Reply: ISR for '96 3.4L done today



All times are GMT -8. The time now is 06:36 PM.