boo204

before you ask I don't have the fill vin number!

All that I have a the serial numer (0379706) off of the side of a 3vz motor. here is a little back ground on why i need this, I am in the process of changing motor after putting a really big hole in the side of my old one. I have the two motor sittig on the floor of the gearge and have run into a couple of small differents. I also have a sencor on the rear of the motor that is broke and I don't know what it is. and the part number don't match up with the old motor for the sencor in the same location.


Any help yopu guys have would be great!!!


thanks!!!


Boo :alien:

boo204

Ok I will able to id the motor as coming out of a 91 runner. dose any one know can i just change out the the plug for the distruber or do i need to swap the whole harness??


thanks

boo :Alien:

Babypig

you can just change the plug. I did the same thing on my 90. Just reference a manual to be sure that the wires are routed the same. They were for me.