Home Powdercoating
#1
Registered User
Thread Starter
Home Powdercoating
Has anyone looked into or are using this system?
http://www.eastwoodco.com/shopping/p...&keyword=10198
Looks like a really cheap way to coat small parts. I would think I can pickup a cheap 2nd hand electric range for under $100.
With the way stuff rusts here, this may be something to help stem the tide...
Anyone looked into this?
http://www.eastwoodco.com/shopping/p...&keyword=10198
Looks like a really cheap way to coat small parts. I would think I can pickup a cheap 2nd hand electric range for under $100.
With the way stuff rusts here, this may be something to help stem the tide...
Anyone looked into this?
#3
Registered User
Thread Starter
For what it's worth, the powdercoater I use buys the hot coat powder for use in his powdercoating equipment since they sell small amounts. The powder itself functions the same as regular powder.
#4
Contributing Member
Join Date: Feb 2004
Location: tulsa, OK
Posts: 1,318
Likes: 0
Received 0 Likes
on
0 Posts
I wonder if powdercoating is a tougher finish than this teflon based stuff BruceTS was talking about in this old thread,
https://www.yotatech.com/forums/show...ht=teflon+oven
Seems like an old electric oven in the garage would be perfect for this stuff too.
https://www.yotatech.com/forums/show...ht=teflon+oven
Seems like an old electric oven in the garage would be perfect for this stuff too.
#6
Registered User
I remember seeing this on an old episode of car and driver (or some show like it) and they made a point to say it WAS toxic and thus would need an oven dedicated to doing it.
They showed how it worked on the show, and it looked cool.
They showed how it worked on the show, and it looked cool.
#7
Registered User
Thread Starter
Trending Topics
#8
Registered User
Join Date: Aug 2004
Location: Tulsa, OK
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ctcost
Heck you could do rims in a regular oven.
#10
Registered User
Thread Starter
Hmmm. An oven big enough to do bumpers/sliders might be neat. I wonder how hard it is to build something from sheetmetal and use a propane heater like Bruce did....
#12
Contributing Member
Join Date: Oct 2002
Location: Charlotte, North Carolina
Posts: 1,661
Likes: 0
Received 0 Likes
on
0 Posts
Hey! I'm glad you brought this up! I was just thinking about this yesterday. It would be cool to be able to powdercoat my own stuff. I didn't realize they had so many color choices! I was talking to some people over the weekend and they were saying a person needed to sand blast or boil the part(s) or something like that to clean the parts before applying the powdercoat. Anybody know anything about that?
Well, that's my $.02 worth.
Have fun all.
DH6twinotter
Well, that's my $.02 worth.
Have fun all.
DH6twinotter
#13
Registered User
Thread Starter
Originally Posted by DH6twinotter
Hey! I'm glad you brought this up! I was just thinking about this yesterday. It would be cool to be able to powdercoat my own stuff. I didn't realize they had so many color choices! I was talking to some people over the weekend and they were saying a person needed to sand blast or boil the part(s) or something like that to clean the parts before applying the powdercoat. Anybody know anything about that?
Well, that's my $.02 worth.
Have fun all.
DH6twinotter
Well, that's my $.02 worth.
Have fun all.
DH6twinotter
#14
Or you could get a portable bead blaster:
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW
they make em big enough to do rims in.
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW
they make em big enough to do rims in.
#15
Registered User
Thread Starter
Originally Posted by ctcost
...they make em big enough to do rims in.
If I only had a compressor strong enough to drive it...
Until I get one, it will continue to gather dust.
#17
Contributing Member
Join Date: Jul 2004
Location: Alden, New York, Suburb of Buffalo, NY
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Hey
I own a Eastwood Powder coating kit and I am very happy with it. I bought the hobby kit two years ago at the Kit car/ import nationals at Carlisle PA. I belong to an MG car club and I have more than paid for the kit by doing valve covers and timing covers and little things like that. A cabinet blaster is definitely necessary. You should also have a dedicated electric oven. I picked up a used one where the cooktop didn't work for $20.00. Multiple grits of blast media help also. The smoother the finish the smoother the piece you must start with. There is a little bit of a learning curve but not bad. Eastwood offers a ton of colors in small quantities to make it affordable. It is definitely worth having in a group of car nuts, but be careful who you tell because everybody you know will want a favor.
I own a Eastwood Powder coating kit and I am very happy with it. I bought the hobby kit two years ago at the Kit car/ import nationals at Carlisle PA. I belong to an MG car club and I have more than paid for the kit by doing valve covers and timing covers and little things like that. A cabinet blaster is definitely necessary. You should also have a dedicated electric oven. I picked up a used one where the cooktop didn't work for $20.00. Multiple grits of blast media help also. The smoother the finish the smoother the piece you must start with. There is a little bit of a learning curve but not bad. Eastwood offers a ton of colors in small quantities to make it affordable. It is definitely worth having in a group of car nuts, but be careful who you tell because everybody you know will want a favor.
#18
Yes you do need a bare metal surface but its gotta be oil and foreign chemical "free" in order for the powder to stick for a long time. At the shop where I was powder coating we used alcohol to wipe the parts down before we hung them. Now they have acid, iron phosphate and a sealer with all fresh water and no dip tanks to pretreat. Anyone can achieve the nice look....but the question is can you make it stick for a while? As far as the oven....if you have a "dedicated" convection oven where the heat is blown around and heats the part up evenly then the powder will bake consistent. I know quite a bit about powder coating....not all...but enough to start my own business so anyone gotta question shoot it at me...
Thread
Thread Starter
Forum
Replies
Last Post
smilen724
86-95 Trucks & 4Runners (Build-Up Section)
13
11-08-2015 04:11 PM
hiluxinargentina
86-95 Trucks & 4Runners
3
09-30-2015 05:51 PM
Toys4parts
86-95 Trucks & 4Runners (Build-Up Section)
2
09-26-2015 01:56 PM