hey 2nd gen ARB bullbar guys
#1
Contributing Member
Thread Starter
hey 2nd gen ARB bullbar guys
how many mounts do these use? there are 4 14mm bolts from the OE bumper and what else? wondering where the strength comes from to be able to winch out of a stuck situation. thanks as always.
#2
This should help ya.
It's been linked here before, but I don't have an actual link of it and a few other things that are on my web site listed in my table of contents on my site.
The mount2 pic shows an empty hole near the rear, and I don't have a bolt in there right now.
But it's plenty strong.
It's been linked here before, but I don't have an actual link of it and a few other things that are on my web site listed in my table of contents on my site.
The mount2 pic shows an empty hole near the rear, and I don't have a bolt in there right now.
But it's plenty strong.
#4
Contributing Member
I installed one and if I remember right it used a total of 14 bolts. There are threaded holes all over the place on the frame. I don't know why Toyota puts all those threaded holes every where, but they are there and ARB bullbar designers took advanage of it.
Last edited by mt_goat; 04-25-2004 at 03:51 PM.
Thread
Thread Starter
Forum
Replies
Last Post