bflooks

hi guys. i have the 2.5" lift installed all around. everything is great. had an allignment done, then noticed they ripped my steering rack dust boot. so i replaced everything on the passenger side at once. inner and outer tie rods and the dust boot. the next day, i got the lifetime allignment at firestone, but! even after requesting they center the wheel, it is not. and i go the printout showing these numbers that have me concerned:

Front Left
Camber: .5
Caster: 1.3
Toe: .10
SAI: 12.8
Included Angle: 13.4

Front Right:
Camber: 1.0
Caster: 1.5
Toe: .10
SAI: 9.5
Included Angle: 10.5


Camber is fine, Caster is below spec, but close. Toe is perfect! however, SAI is below on one side, and super high on the other, and the included angles is super high on one side, and normal on the other. What gives?!?

also, i now have a loud thunk that i can hear and feel in my feet when i hit a speedbump. I am taking it back in tomorrow am, before i get my trxus mounted. any help would be greatly appreciated.