Good Day Until
#1
Registered User
Thread Starter
Join Date: Feb 2003
Location: Kentucky
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Good Day Until
Well today started well. Woke up at 10am w/o much of a hangover from last nights welcome home party for a friend who returned from Afghanistan. After watching some TV I decided to work on the 4Runner. Went to the hardware store around 3pm to p/u the Stainless hardware I needed to switch out all the screws & bolts on my Surco roof rack. I then went by the Toyota dealer to p/u a 90 deg union fitting & breather so I could extend the transfer case. I then stopped at Auto Zone to p/u the hose for the extension.
Once I got home I went to work on the rack while the truck cooled down. The transfer case extension went perfect & while I was under the truck I decided to shoot the drive shaft w/ some Marine grease. When I got to my last fitting on the front drive shaft :wtf: it broke off
This is pressed in 90 degree fitting at the front of the drive shaft. Can it be replaced w/o having to replace the entire shaft???
Once I got home I went to work on the rack while the truck cooled down. The transfer case extension went perfect & while I was under the truck I decided to shoot the drive shaft w/ some Marine grease. When I got to my last fitting on the front drive shaft :wtf: it broke off
This is pressed in 90 degree fitting at the front of the drive shaft. Can it be replaced w/o having to replace the entire shaft???
Thread
Thread Starter
Forum
Replies
Last Post
Kluch8651
95.5-2004 Tacomas & 96-2002 4Runners
0
07-09-2015 10:39 AM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
07-06-2015 01:20 PM