Gear ratio ???
#1
Registered User
Thread Starter
Join Date: Dec 2002
Location: Dallas
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Gear ratio ???
im in need of expert advice...
The Total Chaos lift will widen the front track of my 90 p/u truck by 7". They say if I swap the rear out with a T 100 that I can have symetry b/t front and back. What were the gears that came from the factory in my truck and in the t 100? Also are there different numbers of splines. And can I bolt a runner diff w/e-locker into the t 100 housing??? These are tuff questions and I really need the answers so that I can make my truck sweet on the first try!
thanks
_travis
ps check out my last thread to see what I have learned about lifts.
The Total Chaos lift will widen the front track of my 90 p/u truck by 7". They say if I swap the rear out with a T 100 that I can have symetry b/t front and back. What were the gears that came from the factory in my truck and in the t 100? Also are there different numbers of splines. And can I bolt a runner diff w/e-locker into the t 100 housing??? These are tuff questions and I really need the answers so that I can make my truck sweet on the first try!
thanks
_travis
ps check out my last thread to see what I have learned about lifts.
#2
Banned
Join Date: May 2002
Location: Colorado Springs
Posts: 2,617
Likes: 0
Received 0 Likes
on
0 Posts
Re: Gear ratio ???
Originally posted by supascout
im in need of expert advice...
The Total Chaos lift will widen the front track of my 90 p/u truck by 7". They say if I swap the rear out with a T 100 that I can have symetry b/t front and back. What were the gears that came from the factory in my truck and in the t 100? Also are there different numbers of splines. And can I bolt a runner diff w/e-locker into the t 100 housing??? These are tuff questions and I really need the answers so that I can make my truck sweet on the first try!
thanks
_travis
ps check out my last thread to see what I have learned about lifts.
im in need of expert advice...
The Total Chaos lift will widen the front track of my 90 p/u truck by 7". They say if I swap the rear out with a T 100 that I can have symetry b/t front and back. What were the gears that came from the factory in my truck and in the t 100? Also are there different numbers of splines. And can I bolt a runner diff w/e-locker into the t 100 housing??? These are tuff questions and I really need the answers so that I can make my truck sweet on the first try!
thanks
_travis
ps check out my last thread to see what I have learned about lifts.
I think we need one of those gear ratio and axle identification charts here.... Anyone?
#3
Registered User
#4
Banned
Join Date: May 2002
Location: Colorado Springs
Posts: 2,617
Likes: 0
Received 0 Likes
on
0 Posts
How is he supposed to guess a T-100 rear ratio from that chart? We need a VIN and all the other build codes from a T-100 to figure it out.
The real question is did T-100 have 8 inch diffs or 8.4?
The real question is did T-100 have 8 inch diffs or 8.4?
#5
Registered User
Thread Starter
Join Date: Dec 2002
Location: Dallas
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the link. I e-mailed the guy and gave him the vin off my truck and a T-100 we'll see what he has to say! If anybody has former experiance in these maters please let us know?
_travis
_travis
Thread
Thread Starter
Forum
Replies
Last Post
Shaun Crystal Gomban
Pre 84 Trucks
5
07-30-2015 10:13 PM
justdifferentials
Just Differentials
0
07-22-2015 08:26 PM