Ebay Aisin Hubs
#3
Registered User
Thank you!!
Hey Corey - Thanks for the link - I won this auction for $46 + shipping. Everywhere around here was quoting me $150 per pair. One place was going to make me pull them for that price. Thanks again.
#5
Contributing Member
Thread Starter
Join Date: Oct 2002
Location: Bradenton, Florida
Posts: 992
Likes: 0
Received 0 Likes
on
0 Posts
Hey Cebby..thats cool... i made the first bid...so did you make the 2nd and outbid me? i would of kept bidding on them..but i am moving so im not sure where i would of needed them shipped to. hmmm...maybe i should email that guy and try and get some kind of commission...
#6
Registered User
Side Vents
I didn't bid on anything but the hubs. My first auction and I won. Maybe I bid too much? I emailed the seller and he has other stuff not on the auction. I am getting another item from him myself. He might be a good source for obscure stuff. I've asked about other items, we'll see how that shakes out. Corey, sorry for outbidding you. I think there were a total of 9 or 10 bids. 4 or 5 were me. Obviously, it was the last one that counted...
#7
Contributing Member
Thread Starter
Join Date: Oct 2002
Location: Bradenton, Florida
Posts: 992
Likes: 0
Received 0 Likes
on
0 Posts
yeah..i guess the only bid that counts is the last one. did he total his rig or what? you did get a good buy!! have fun with them. do i smell another write up?
Trending Topics
#8
Registered User
Smell?
j/k
I'll do a writeup, but I'll probably use the many writeups out there for my own guidance. I guess I'll need to do a poll for what color to paint the dials now...
I'll do a writeup, but I'll probably use the many writeups out there for my own guidance. I guess I'll need to do a poll for what color to paint the dials now...
#9
Contributing Member
Thread Starter
Join Date: Oct 2002
Location: Bradenton, Florida
Posts: 992
Likes: 0
Received 0 Likes
on
0 Posts
i like the classic red and black that they came in...i say stick with that..after all Coreys looks good..but im sure he waxes and buffs them too..
#11
Registered User
How long?
For those of you that have done this mod, how long should it take? If I run out of time in one sitting, can I get one done then do the other later? (As long as I keep the manual one locked?) My modding time is frequently interrupted...:mad:
#12
Contributing Member
Join Date: Jul 2002
Location: Burke, VA
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
I did this mod and the hardest part was getting the cone washers out (see my write up in the tech section). After I knew what I was doing, I think it took me about 45 minutes per side which includes jacking up the truck, removing the wheel, etc.
Matt
Matt
#13
Registered User
Got 'em
I got my hubs over the weekend - Fed Ground left them on the front porch and I didn't see them until this morning...:rolleyes:
Of course I had to stop and open them on my way to the office this morning...
First impression - man are these things filthy!! Nothing a bath can't cure. I was amazed at how solid feeling these are. One thing that seemed odd to me. The hub body (not the dial or trim around the dial) was painted red (alot worn off though). Was this a factory finish? All the hubs I've seen had a black body. I'm repainting them, so no biggie - just found it odd.
Of course I had to stop and open them on my way to the office this morning...
First impression - man are these things filthy!! Nothing a bath can't cure. I was amazed at how solid feeling these are. One thing that seemed odd to me. The hub body (not the dial or trim around the dial) was painted red (alot worn off though). Was this a factory finish? All the hubs I've seen had a black body. I'm repainting them, so no biggie - just found it odd.
#15
Registered User
Join Date: Jun 2002
Location: Victoria, BC
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Yep. I think the body is factory unfinished. I just scored a pair this weekend for $30 (Canadian). I don't need them but it was such a deal! I have in my hands as we speak a rag and the snap rings. Just trying to get them clean.
I painted my first pair factory colours but I'm going with a black outer ring and John Deere Green for the dial this time. I'll post some pics when done.
Warren
I painted my first pair factory colours but I'm going with a black outer ring and John Deere Green for the dial this time. I'll post some pics when done.
Warren
#16
Registered User
Originally posted by UKMyers
That Seller has 3 pages for parts for both 1st and 2nd Gens. Lot's of interior pieces!!
That Seller has 3 pages for parts for both 1st and 2nd Gens. Lot's of interior pieces!!
Thread
Thread Starter
Forum
Replies
Last Post
kawazx636
The Classifieds GraveYard
34
10-06-2021 03:03 PM
Toys4parts
86-95 Trucks & 4Runners (Build-Up Section)
2
09-26-2015 01:56 PM