Watts&Volts

Daytime running light disable on a 1992 truck 4X4. I picked up a set of the diamond cut headlights and I don't want them on all day unless I turn them on. How do I get around the DRL system without screwing up any other lights?

eric-the-red

Try these links, one says yellow wire, and one says yellow/red, I guess check which one you have, either way it should be live only when the engine is running

http://bb.bc4x4.com/showthread.php?s...aytime+running

http://4wd.media-north.com/drl.htm

Watts&Volts

I coulden't get the 2nd link to work? I have an idea where to find it, and what it looks like, I just don't want to screw up any of those little computers. I have found that it is almost cheeper to replace the truck than some of the sensors and computer parts!

eric-the-red

According to that post it's in the centre of the truck, below the ashtray and radio, but my manual says right side of instrument panel. No idea what it looks like. Looking at the wiring diagram it has 12 wires:
black/orange
green/blue
red/green
red/blue
grey/yellow
yellow
green/white
white/black
blue/yellow
green
yelow/red
green/white

02Surf SSR-X 4xSport

Disconnect D4 PIN 2 (Black/Orange stripe) wire.
Install an inline switch for manual operation.