Converting to manual hubs from taco, what all do i need?
#1
Registered User
Thread Starter
Converting to manual hubs from taco, what all do i need?
Ok, I had the list a while back but have since misplaced it. anyway, the guy i am getting my stuff from finished his SAS and i can get my parts now, i just need to know what all i need to get. The parts are going on a 1997 limited 4runner and coming off a Taco.
CV axles
Hubs
Spindles (?)
What else?
Thanks,
Justin
CV axles
Hubs
Spindles (?)
What else?
Thanks,
Justin
#2
Registered User
Join Date: Nov 2002
Location: San Diego
Posts: 927
Likes: 0
Received 0 Likes
on
0 Posts
I'll bump this up for ya, since I've asked this a couple of different places and haven't gotten a definite answer. Come on, I need a shopping list of parts to get from the donor Taco!
#3
Registered User
Thread Starter
i posted this over at ttora and got a few replies, seems that i need the Hubs, CVs, and spindles and that should be it as long as all the bearing and everything are good.
Thread
Thread Starter
Forum
Replies
Last Post
Steven.m.paulk
86-95 Trucks & 4Runners (Build-Up Section)
3
07-24-2015 01:44 PM