Dare44

i finished my lift today and i was about to put in my dif drop in and it doesnt seem to fit, the bolts are barely long enough to go in the stock holes without the spacers. so wats the deal am i missing something? o and my 4runner is a 97 with the 3.4 and all the suspension and the dif drop is toytec

Mason Dixon

i had a problem at first too, try a little lube on the bolts to get them to start up in the holes of the crossmember. I had to pound mine in with a hammer at first.

toy_tek

Did the kit come with longer bolts? You (obviously) can't use the stock bolts with the spacers.

4Crawler

iTrader: (3)

Bolts should be about 8" long for that vehicle:
- http://www.4crawler.com/4x4/ForSale/...l#Installation

BajaRunner

I needed new bolts for them to work... I think?

Dare44

i called toytec and they sent me the wrong bolts, they were very helpful and the new bolts are on the way , thanks for u help guys