ARIZONA - Saturday Night Meet & Greet with ADRIAN FLYGT (WIS)
07-03-2003, 07:17 PM
#1
Contributing Member
Thread Starter
Join Date: May 2002
Location: Tempe, Arizona
Posts: 5,278
Likes: 0
Received 0 Likes
on
0 Posts
ARIZONA - Saturday Night Meet & Greet with ADRIAN FLYGT (WIS)
July 12, 2003 we will be meeting at Casey Moores Oyster house located @ 9th and Ash in Tempe. One block west of Mill at 9th street. The house is haunted. Time will be announced later. I would like to see all of the Pavilions Meet and Greet crowd as well. Casey Moores is a restaurant as well as bar. All ages will work. Come on out and meet the Cheese Head!
We will be wheeling the next day, July 13, 2003 but the run will be difficult and only the well built trucks should attend.
Martinez Canyon & Upper Woodpecker which are the best representations of 4Wheeling in the state.
Contact me if you have any questions or need any info. Adrian and myself camped together in Colorado last year. We were also the only 2 guys to have the Rockstomper pinch weld sliders. We go back some years. Come on out and melt the cheese!
I know this would fit better in the Trail section but if you guys could leave it here for a bit so all the Zonies can see it, I would really appreciate it.
We will be wheeling the next day, July 13, 2003 but the run will be difficult and only the well built trucks should attend.
Martinez Canyon & Upper Woodpecker which are the best representations of 4Wheeling in the state.
Contact me if you have any questions or need any info. Adrian and myself camped together in Colorado last year. We were also the only 2 guys to have the Rockstomper pinch weld sliders. We go back some years. Come on out and melt the cheese!
I know this would fit better in the Trail section but if you guys could leave it here for a bit so all the Zonies can see it, I would really appreciate it.
:bounce2: 
:wtf:
07-04-2003, 04:03 PM
#3
Contributing Member
Join Date: May 2002
Location: Atlanta, GA
Posts: 2,068
Likes: 0
Received 0 Likes
on
0 Posts
id wouldve met if it was this past week, Ive been @ the Boulders in Scottsdale all week. 
. leaving tomorrow. :cry:
see ya around
. leaving tomorrow. :cry: see ya around
Last edited by RTdawgs; 07-04-2003 at 04:05 PM.
07-04-2003, 06:21 PM
#4
Contributing Member
Join Date: Jul 2002
Location: Tempe, AZ
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
The Boulders eh? Do your folks live up there? Nice area.
I might be down for Casey Moores.. I'm not sure if they will ever let me in again - but that is another story.
BTW - their food rocks, but we better get there before 7pm if we want to eat. It gets crowded on a saturday night.
Can I go wheeling?
Dan
I might be down for Casey Moores.. I'm not sure if they will ever let me in again - but that is another story.
BTW - their food rocks, but we better get there before 7pm if we want to eat. It gets crowded on a saturday night.
Can I go wheeling?
Dan
07-04-2003, 09:21 PM
#7
Contributing Member
Join Date: May 2002
Location: Atlanta, GA
Posts: 2,068
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by asudan96Runner
The Boulders eh? Do your folks live up there? Nice area.
The Boulders eh? Do your folks live up there? Nice area.
just got back from fireworks at Rawhide, it was nuts.
Trending Topics
07-04-2003, 11:19 PM
#8
Contributing Member
Join Date: Jul 2002
Location: Tempe, AZ
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
Rawhide always has a great show. I usually do the show in Tempe because it is walking distance from my house. This year I just watched from my roof.
let us know next time you are in AZ.
Dan
let us know next time you are in AZ.
Dan
07-05-2003, 05:48 AM
#9
Contributing Member
Thread Starter
Join Date: May 2002
Location: Tempe, Arizona
Posts: 5,278
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by asudan96Runner
oh I do! I do! Now if I only had a panhard drop adapter thingy... then I would be styling!
Dan
oh I do! I do! Now if I only had a panhard drop adapter thingy... then I would be styling!
Dan
Yeah I know. I have to make more. A guy back east wants one too. 2 weeks or so I'll have more.
We are more than likely going to Martinez Canyon. It's a hard one.
07-07-2003, 07:12 AM
#12
Contributing Member
Join Date: Aug 2002
Location: High Point NC
Posts: 2,063
Likes: 0
Received 0 Likes
on
0 Posts
Steve,
Let us know when you get a few panhards brakets fabbed, I really need one, it's been too long with a lift and no panhard relocation. Also, do you have and how much are they, the skid plate for the E-locker? I just got me some new wheels(96' locked Runner) and I want to make darn sure I never loose that thing on a rock.
Let us know when you get a few panhards brakets fabbed, I really need one, it's been too long with a lift and no panhard relocation. Also, do you have and how much are they, the skid plate for the E-locker? I just got me some new wheels(96' locked Runner) and I want to make darn sure I never loose that thing on a rock.
07-07-2003, 09:20 AM
#14
Banned
Join Date: Jul 2003
Location: White Mountains, Arizona (Yes it does snow in AZ)
Posts: 553
Likes: 0
Received 0 Likes
on
0 Posts
Hey, you AZ boys ought to visit my neck of the woods sometime! Take in the sites, wheel through some great country while your at it! I haven't been 4x'in that long, but I can definately show you where and how to get stuck!
Seriously, if any of you guys get up this way I can take you out fishing where you must have 4x4, and a locker doesn't hurt! Andy- 97 tacoma(wifes 4x)
- 87 4runner (my 4x) Take care!
Seriously, if any of you guys get up this way I can take you out fishing where you must have 4x4, and a locker doesn't hurt! Andy- 97 tacoma(wifes 4x) - 87 4runner (my 4x) Take care!
07-07-2003, 11:30 AM
#15
Contributing Member
Thread Starter
Join Date: May 2002
Location: Tempe, Arizona
Posts: 5,278
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Stump1883
Steve,
Let us know when you get a few panhards brakets fabbed, I really need one, it's been too long with a lift and no panhard relocation. Also, do you have and how much are they, the skid plate for the E-locker? I just got me some new wheels(96' locked Runner) and I want to make darn sure I never loose that thing on a rock.
Steve,
Let us know when you get a few panhards brakets fabbed, I really need one, it's been too long with a lift and no panhard relocation. Also, do you have and how much are they, the skid plate for the E-locker? I just got me some new wheels(96' locked Runner) and I want to make darn sure I never loose that thing on a rock.
Dan wants one, A guy back east wants one and you want one. Give me another 2 weeks or so. I'll have 5.
07-07-2003, 11:32 AM
#16
Contributing Member
Thread Starter
Join Date: May 2002
Location: Tempe, Arizona
Posts: 5,278
Likes: 0
Received 0 Likes
on
0 Posts
I bought the e-locker skid thing from Marlin, you can get those at a few different places.
More info:
http://www.fastq.com/~sschaefer/MC09/rore.html
More info:
http://www.fastq.com/~sschaefer/MC09/rore.html
07-07-2003, 06:56 PM
#18
Registered User
I will be there for sure.
As for the trails, I have a couple of lockers, some gears, two bumpers, sliders, skidplates and a spare CV. I will stack rocks and take bypasses as needed, I am not too proud for that.
I will be in touch with e-mail again Steve, thanks for throwing this up, too bad it doesn't sound like there are any extra takers.
Peace,
Adrian
As for the trails, I have a couple of lockers, some gears, two bumpers, sliders, skidplates and a spare CV. I will stack rocks and take bypasses as needed, I am not too proud for that.
I will be in touch with e-mail again Steve, thanks for throwing this up, too bad it doesn't sound like there are any extra takers.
Peace,
Adrian
