Jason B

Is MAF sensor and different for 96-98 4Runners, vs 99-02???

250000_yota

95.5-98 uses the MAF that comes mounted in the housing.

99-02 uses the removeable MAF mounted to the intake tube just after the af housing with two screws.

Jason B

Ok, so I'm wondering, this intake I sell, is listed for 99-02, and do you think there is anyway this would work on 96-98 with the different maf?

see pdf:

http://www.sbfilters.com/core/media/...ee280&_xt=.pdf

Elton

its really not hard to switch over to a 99 style maf i did and its been running perfect ever since

Elton

also if its just the intake tube it should be all the same but if it replaces the entire factory air box then i doubt one for a 99 will work for a 98

Jason B

Yea, the whole airbox gets replaced with a new highflow box. Check out that PDF. That's the question, would it work for a 96-98. That link is pretty detailed with pics.

Elton

ya link didn't work for me

Jason B

Try right click and saving it, then open it.

250000_yota

I have a '98 T100, which uses the older style MAF. The intake I got for free was for a 99-02 Tacoma. I cut the intake tube off where the MAF port was, and used a spectre silicone cuppler from autozone to attach the MAF to the tube.

Greg_Canada

TO run a 99+ MAF in a pre99 you need to re-pin the harness...

Elton

ya i couldn't figure out how to repin mine so i just cut and re soldered

CLin9383

Here is a link to upgrade to 99-02 MAF.

http://www.ultimateyota.com/index.ph...6&topic=3915.0

Jason B

Intersting...

terminator

iTrader: (1)

Interesting indeed. Same concept of repinning applies when converting your 96-00 tails to the 01-02 style on both 4Runners and Tacomas.