And another T15 goes on...
06-08-2003, 01:32 PM
#1
Registered User
Thread Starter
Join Date: May 2002
Location: Langley AFB, VA
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
And another T15 goes on...
Specail thanks to Mike at Extreme Offroad for the group buy. I had to do a little modifying to accomodate my body lift, I trimmed a little off the bottom part of the brackets where it meets the bumper, and I was able to lengthen the slots on the bumper by just over an inch, left me with a gap of about 3/4" all around, doesn't look bad at all, especially considering I have a 2" body lift. I need to put some spacers under the PIAA's though, the grill on the lights hits the bumper before I can level them out.
06-08-2003, 05:25 PM
#2
Looks real good man! I'm still waiting for mine to arrive at the end of this month 
. It's alright coz I'll be out of town till Jul 2nd anyway. Our ship is going to Boston this week for some festivities. Anybody from Boston area?
George
. It's alright coz I'll be out of town till Jul 2nd anyway. Our ship is going to Boston this week for some festivities. Anybody from Boston area?George
06-08-2003, 05:34 PM
#3
Contributing Member
Join Date: Oct 2002
Location: Bradenton, Florida
Posts: 992
Likes: 0
Received 0 Likes
on
0 Posts
man...all these T15 installs are killing me. i wish i had money saved up that way i could buy one!! It looks really good!!! man i wish i could buy one!! :cry: :cry:
06-08-2003, 06:56 PM
#7
Contributing Member
Join Date: Aug 2002
Location: Wallingford, Ct
Posts: 1,594
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by metal22lica
man...all these T15 installs are killing me. i wish i had money saved up that way i could buy one!! It looks really good!!! man i wish i could buy one!! :cry: :cry:
man...all these T15 installs are killing me. i wish i had money saved up that way i could buy one!! It looks really good!!! man i wish i could buy one!! :cry: :cry:
Damn, now my keyboard is all soaked with drool!
Trending Topics
06-09-2003, 09:15 AM
#9
Contributing Member
Join Date: Feb 2003
Location: CT
Posts: 613
Likes: 0
Received 0 Likes
on
0 Posts
Looks good Bill!
I installed mine this past Saturday. I have a 1" body lift but didn't take the time to extend the slots. I wanted to see if I could get away without hacking things up. I think it looks fine. The gap looks to be the same as yours pictured above. Not too bad.
Awesome bumper though! I've gotten lots of compliments already and have seen some heads turn. I'll post pictures too when I get some time.
I installed mine this past Saturday. I have a 1" body lift but didn't take the time to extend the slots. I wanted to see if I could get away without hacking things up. I think it looks fine. The gap looks to be the same as yours pictured above. Not too bad.
Awesome bumper though! I've gotten lots of compliments already and have seen some heads turn. I'll post pictures too when I get some time.
06-09-2003, 09:19 AM
#10
Registered User
Join Date: Mar 2003
Location: SW MI
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by george16
Looks real good man! I'm still waiting for mine to arrive at the end of this month . It's alright coz I'll be out of town till Jul 2nd anyway. Our ship is going to Boston this week for some festivities. Anybody from Boston area?
George
Looks real good man! I'm still waiting for mine to arrive at the end of this month
. It's alright coz I'll be out of town till Jul 2nd anyway. Our ship is going to Boston this week for some festivities. Anybody from Boston area?George
where you going to be?
Todd
06-09-2003, 01:39 PM
#11
Contributing Member
Join Date: Feb 2003
Location: Seattle, WA
Posts: 2,858
Likes: 0
Received 0 Likes
on
0 Posts
Sweet, very very sweet. After a bit of a wait, mine arrived this afternoon, had to run home to meet the delivery truck. I am patiently biding my time at work so I can get out of here and git it on'!
06-09-2003, 01:45 PM
#12
Contributing Member
Join Date: Jan 2003
Location: Houston, TX
Posts: 5,377
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Mad Chemist
Sweet, very very sweet. After a bit of a wait, mine arrived this afternoon, had to run home to meet the delivery truck. I am patiently biding my time at work so I can get out of here and git it on'!
Sweet, very very sweet. After a bit of a wait, mine arrived this afternoon, had to run home to meet the delivery truck. I am patiently biding my time at work so I can get out of here and git it on'!
06-09-2003, 01:46 PM
#13
Registered User
Join Date: May 2002
Location: Hamilton, ON
Posts: 3,644
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by TStango
Looks good Bill!
I installed mine this past Saturday. I have a 1" body lift but didn't take the time to extend the slots. I wanted to see if I could get away without hacking things up. I think it looks fine. The gap looks to be the same as yours pictured above. Not too bad.
Awesome bumper though! I've gotten lots of compliments already and have seen some heads turn. I'll post pictures too when I get some time.
Looks good Bill!
I installed mine this past Saturday. I have a 1" body lift but didn't take the time to extend the slots. I wanted to see if I could get away without hacking things up. I think it looks fine. The gap looks to be the same as yours pictured above. Not too bad.
Awesome bumper though! I've gotten lots of compliments already and have seen some heads turn. I'll post pictures too when I get some time.
06-09-2003, 02:04 PM
#15
Contributing Member
OK, Mine is on too!
Finally did my bumper on Sunday. I too have the 1" BL and I didn't want the gap so I slotted the mounts on the bumper and not the frame. I then realized that inorder to clear the frame mounts (as a few of you have described) I had to grind a slot on each side of the lower bumper to clear the mounts. I really like how it turned out and I have had a number of compliments.
06-09-2003, 02:13 PM
#16
Contributing Member
OK, Mine is on too!
Finally did my bumper on Sunday. I too have the 1" BL and I didn't want the gap so I slotted the mounts on the bumper and not the frame. I then realized that inorder to clear the frame mounts (as a few of you have described) I had to grind a slot on each side of the lower bumper to clear the mounts. I really like how it turned out and I have had a number of compliments.
EDIT: I'm trying to attach photos but my computer isn't being nice so when I can get them to work I will post
EDIT: I'm trying to attach photos but my computer isn't being nice so when I can get them to work I will post
06-09-2003, 04:04 PM
#17
Registered User
Join Date: Oct 2002
Location: middleburg, VA
Posts: 1,005
Likes: 0
Received 0 Likes
on
0 Posts
I talked to the shipping company today. They said mine should be here between 9 and 12. So it should be on by tomorrow evening if all goes like it should. dont worry i will post pics.
06-09-2003, 04:14 PM
#18
Originally posted by Todd E
Ya, I'm in Boston.
where you going to be?
Todd
Ya, I'm in Boston.
where you going to be?
Todd
George
06-09-2003, 07:08 PM
#19
Contributing Member
Join Date: Feb 2003
Location: CT
Posts: 613
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Vato Loco
We need pics!
We need pics!
After looking at the pics I think I am going to extend the slots so I can raise the bumper up for a snug fit. Lights are on the way too.
Next mod is sliders because I got cocky this weekend driving through the woods and brushed my rear pass. door against a tree. No dents but some nice long scratches
Thanks again Mike, for doing the group buy
Last edited by TStango; 06-10-2003 at 04:46 AM.
