Another happy customer (URD Crankpulley Installed) and custom endlinks
07-21-2007, 09:24 PM
#1
Registered User
Thread Starter
Join Date: Jan 2004
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
Another happy customer (URD Crankpulley Installed) and custom endlinks
Just thought I share my new mods with you guys.
Purchased a new URD Crankpulley from a gonzopb.
Here it is installed just this morning which took about an hour.
So far its running pretty good....it just runs and idles smooth. Just find it hard to ease off the gas pedal now
. Throttle response has improved a lot, picking up speed from a dead stop with ECT button on is a blast. I only got to drive it for 35 miles today...we'll see if anything comes up later on.
Next mod was the custom sway bar endlinks. Mines broke shortly after installing the PP springs and Bilstein shocks. It just snapped off while exiting a parking garage, had to limp it home for repairs. It was just sloppy on the freeway with slow steering response. I read through all the post and everyone recommended WabFab disconnects which looks pretty good and beefy but seeing as I don't offroad much at all, I thought I make my own.
Purchased a new URD Crankpulley from a gonzopb.
Here it is installed just this morning which took about an hour.
So far its running pretty good....it just runs and idles smooth. Just find it hard to ease off the gas pedal now
. Throttle response has improved a lot, picking up speed from a dead stop with ECT button on is a blast. I only got to drive it for 35 miles today...we'll see if anything comes up later on.Next mod was the custom sway bar endlinks. Mines broke shortly after installing the PP springs and Bilstein shocks. It just snapped off while exiting a parking garage, had to limp it home for repairs. It was just sloppy on the freeway with slow steering response. I read through all the post and everyone recommended WabFab disconnects which looks pretty good and beefy but seeing as I don't offroad much at all, I thought I make my own.
07-21-2007, 11:04 PM
#2
Registered User
Join Date: Sep 2003
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
Nice. I had similar results. No problems yet.
My writeup:
https://www.yotatech.com/forums/f2/u...talled-119151/
My writeup:
https://www.yotatech.com/forums/f2/u...talled-119151/
07-22-2007, 02:17 PM
#7
Registered User
Thread Starter
Join Date: Jan 2004
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
Got it new from a member here who bought it brand new n decided not to keep it for $210. Normal price is at $285 from www.urdusa.com
Thread
Thread Starter
Forum
Replies
Last Post
priest16
84-85 Trucks & 4Runners (Build-Up Section)
15
08-06-2015 07:43 AM
defrag4
Vehicles - Trailers (Complete)
0
07-31-2015 10:50 AM
Esibnitsud
86-95 Trucks & 4Runners
0
07-30-2015 08:19 PM
