TC4RNR

my stock leather shifter knob was all messed up after 10 years of use, and it has a weird smell, too. i don't wannt an afermarket one because most of them are either aluminum or plastic. i really like the newer model auto trans shifter knobs because they are bigger and more comfortable but the threads are different. stealers want $80-100 for a replacement leather knob, that's way too expensive for me.

here is what i did, i bought a Tacoma shifter on ebay for $25, a grade 10.9 M8 bolt for $0.80.

first, removed the shifter lever assembly, then cut the lever with a band saw.



rounded the hex bolt to proper size using a belt sander, to it fits right in the hollow shifter lever. then tig welded them together, re-installed the lever assembly.




screw the knob on




here is the final result





the whole thing took me about half an hour from start to finish, probably would be an hour if i did have a belt sander and band saw. tig welder is better but mig will do just fine, only needs more cleaning afterwards.

Ron Helmuth

Looks nice but I am clearly missing something-can't you just unscrew the 99 knob and replace it with the 05 knob?

I like the Momo woodgrain knobs myself but the newer Runner one looks nice also.

881stGenRunner

amazing job that looks really good and it matches very well!

he said they were different thread pitches

TC4RNR

nope. differen thread size and pitch. 10mm(99 4Runner 5spd) vs. 8mm(05 Taco auto)

tj884Rdlx

nice work man! when you got welding skills, may as well use 'em!

Ron Helmuth

thanks I missed that detail, thanks for filling me in