4wd Fully-Fabricated Spindles for Taco/Tundra/4Runner Models
05-14-2011, 11:38 PM
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Jul 2009
Location: Central, Arkansas
Posts: 1,088
Likes: 0
Received 0 Likes
on
0 Posts
4wd Fully-Fabricated Spindles for Taco/Tundra/4Runner Models
Solo Motorsports out of California are introducing a new line of custom fabbed 4wd spindles for 96-04 Taco, 95+ Taco, 96-02 4Runner and 00-06 Access Cab Tundra. No product has hit the shelf yet but they will soon.
Solo Motorsports - - Click
TTORA Thread -- Click
I'm in no way affiliated with this company, just felt like being nice and spreading the word.
Mods, if this thread needs to be moved please do so. I looked for a corresponding section but was un-successful. This is not a for sale ad. There is no product currently available.
4wd Fully-Fabricated Spindles are almost ready!!!!!!!!!!
Here's a sneak-peek of the Solo Motorsports designed 4wd Spindles........As you can see, we've designed our 4wd spindles similar to the "Fully-Fabricated 3" Lift Spindles" but without the lift since it's a 4wd spindle.........The plating will interlock together. These pics just show the intended slotting.....
This design will also incorporate the 1" Uniball Lower Steering/Knuckle Conversion as an option for the Long-Travel Guys......
To run these spindles all you need is any aftermarket UCA or Upper Control Arm with a 1" Uniball...................
As far as price is concerned, there's a lot more machining involved....our target price is $1450 -- $2000 pr......Say good-bye to broken 4wd spindles......
05+ 4wd Fully-Fabricated Spindles should be ready sometime in June/July 2011...
If you have any questions, please CALL as these are not on our website yet.......
Call M-F 9am-5:30pm pst @ 626.966.7656 or E-mail info@solomotorsports.com
We will take PRE-ORDERS possibly starting the week of May 16th, 2011..............THIS IS THE CHEAPEST TIME TO PURCHASE THESE 4WD SPINDLES!!!!!!
4wd Model Fitment:
96-04 Tacoma
00-06 Access-Cab Tundra.
96-02 4Runner
Here's a sneak-peek of the Solo Motorsports designed 4wd Spindles........As you can see, we've designed our 4wd spindles similar to the "Fully-Fabricated 3" Lift Spindles" but without the lift since it's a 4wd spindle.........The plating will interlock together. These pics just show the intended slotting.....
This design will also incorporate the 1" Uniball Lower Steering/Knuckle Conversion as an option for the Long-Travel Guys......
To run these spindles all you need is any aftermarket UCA or Upper Control Arm with a 1" Uniball...................
As far as price is concerned, there's a lot more machining involved....our target price is $1450 -- $2000 pr......Say good-bye to broken 4wd spindles......
05+ 4wd Fully-Fabricated Spindles should be ready sometime in June/July 2011...
If you have any questions, please CALL as these are not on our website yet.......
Call M-F 9am-5:30pm pst @ 626.966.7656 or E-mail info@solomotorsports.com
We will take PRE-ORDERS possibly starting the week of May 16th, 2011..............THIS IS THE CHEAPEST TIME TO PURCHASE THESE 4WD SPINDLES!!!!!!
4wd Model Fitment:
96-04 Tacoma
00-06 Access-Cab Tundra.
96-02 4Runner
Solo Motorsports - - Click
TTORA Thread -- Click
I'm in no way affiliated with this company, just felt like being nice and spreading the word.
Mods, if this thread needs to be moved please do so. I looked for a corresponding section but was un-successful. This is not a for sale ad. There is no product currently available.
08-01-2011, 05:27 PM
#2
Registered User
Join Date: Dec 2008
Location: SoCal & Nicaragua
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Unbreakable spindles?
Nice find!
Finally a manufacturer that is actually coming-out with a beefed-up
spindle for 4WD ! (I've broken no-less than two of these!)
Kind of pricey... but I also do like the idea of a 1" lower uniball over the
current stock balljoint.
Finally a manufacturer that is actually coming-out with a beefed-up
spindle for 4WD ! (I've broken no-less than two of these!)
Kind of pricey... but I also do like the idea of a 1" lower uniball over the
current stock balljoint.
04-06-2012, 03:33 PM
#4
Registered User
Join Date: Apr 2012
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
06-28-2012, 06:16 PM
#5
Registered User
Join Date: Apr 2012
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
LJR
General Electrical & Lighting Related Topics
1
09-05-2015 06:02 AM
Badfish740
86-95 Trucks & 4Runners
4
09-04-2015 04:21 AM
highonpottery
86-95 Trucks & 4Runners
6
08-25-2015 03:45 PM
