3rd Gen aftermarket Exhaust
#2
Contributing Member
Join Date: Sep 2003
Location: Littleton,CO
Posts: 10,549
Likes: 0
Received 0 Likes
on
0 Posts
Just buy a nice muffler like a Magnaflow and have a shop make you one;this route when I take it will keep the cost under $300. TRD stuff while it is nice is just overpriced when you can buy the same results and quality for less. An exaustt on an NA Runner is more about the sound since HP gains are minimal but going with a 2 and 1/4 system you might feel a little more midrange increase.
#3
Registered User
Thread Starter
Join Date: Nov 2004
Location: Norcal
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
Alright is there any specific size of Magnaflow muffler that we need? Also does it benefit to have manderal bent piping or is crush bent alright as well?
#4
Registered User
iTrader: (1)
Join Date: May 2004
Location: PHX
Posts: 506
Likes: 0
Received 0 Likes
on
0 Posts
Jardine has a nice cat back for the 3.4. Check out Cory's web page below for combinations and sound bites. Might help you out.
http://pnw4runners.com/exhaust/exhaust.htm
http://pnw4runners.com/exhaust/exhaust.htm
#5
Registered User
Originally Posted by 2000t4r
What do you guys do for aftermarket exhaust systems besides the TRD one. I did a search but didn't find anything.
you MUST be kidding.
bob
#6
Contributing Member
Join Date: Sep 2003
Location: Littleton,CO
Posts: 10,549
Likes: 0
Received 0 Likes
on
0 Posts
Crush bent is fine for our applications;it's more about the sound you deise or don't desire. I hear (hehe) the Magnaflow 18" mufflers can be a bit loud but alot of people do like the 24" version.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
10-19-2015 05:28 PM