wheelerz

Hi,
I'm looking to get this swap done (not by me)... I have to see how much it will cost me. What are the parts that I will need to buy. Reading some info on it it seem that people have different opinions.

I have found a 96 3.4L at a low price for me 93 Truck (manual).

I know I'll need :
Engine
ECU
Wiring Harness

What else should I add...

I have read ...
Flywheel
Clutch

Cebby

If someone else does it, expect to pay around $5000 including parts and labor. Maybe slightly less if you can score a good deal on the parts.

wheelerz

the labor it's ok... it's someone I know. I don't need a price I need the parts needed from someone who has done it.

aLostDawg

Helpful information:

Check out this webpage for a good start of the parts you will need. I don't remember all of the parts I used since I finished mine about 6 months ago.

Cebby

I don't know where I got the idea you needed a price guesstimate...

wheelerz

I want to calculate the price of each needed item. If i have the item i can look in my region how the parts cost.

wheelerz

i read a couple of threads... and thats why im questionning people who made that because people didnt seem to use as much parts as ORS did.

And is there a difference If I buy a 96 3.4L or a 2000... Will it be more simple if y get the 96 ?

Cebby

The easiest way to go should be to swap the complete 3.4 with trans/tcase, wiring harness and ECU. I'm looking at a 1UZ swap and alot of the folks swear by swapping the whole engine/trans to assure the ECU is getting all the right signals.

Look on www.car-part.com for the parts.