You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
:cry: I have a 94 toyota that I put a new 3.0 engine into. Everything was fine until one day when I was driving it all of the sudden it died. A friend of mine told me to replace the ignitor that is mounted on the coil, so I did... well I made it about 5 miles before it died again. The next day it started up again, except when I got past about 3000 rpm it died, and would not start... So after that I replaced the air valve thing that mounts on top of the air cleaner box. Now it just studders at the same rpm.... So after that I replaced the coil, the computer, and the distributer, all had the same result... I did however put a stethoscope on one of the injectors and notice that they pulsate and that rpm range. Any advice would be greeeeeeeeaaaaaatly appreciated!!!!!!!!!!!!!!!!!!!!!!!!!!! Thanks Cory..
This ad is not displayed to registered members. Register your free account today and become a member on Yotatech!
11-09-2005, 05:43 PM
Similar Threads
