patin22

I just installed a 3" lift on my 02 4runner a few weeks ago. I also put on 285/75/16 tires. My inner CV boots have now shredded due to the angle. Not slightly torn, but completely ripped apart. I was told that porsche 930 boots were a good alternative to the stocks. Does anyone have any info/alternatives/suggestions?

Thanks!

Rock Slide

iTrader: (1)

You have got to install at least a 1" diff drop, otherwise you will continue to destroy your cvs.

Check out www.sonoransteel.com

netwt12

toy-tec diff drop http://www.toyteclifts.com/96024runn...rfrontliftopts

04 Rocko Taco

Diff drop, and the porsche boots are a decent investment if you want to... But really once you drop the diff and correct those CV angfles you shouldnt have a problem.

KZN185W

iTrader: (1)

May i know what part numbers to order for the porsche cv boots (inner and outer) for the 3rd gen 4Runner?


Thanks!

dropzone

iTrader: (6)

Contact Porshe or check a Porshe forum for the 930 CV's. I ran them on a Baja years ago, they can operate at serious angles...
http://cgi.ebay.com/ebaymotors/Porsc...QQcmdZViewItem
less than $30 for 4 w/ free shipping

neliconcept

usually when you do that, your diff is going to explode, just depends on the wheeling habits

mokai

I have the revtek 3" on my 03 Taco and have not had any problems with the CV's..No diff drop and My angles look pretty minimal..

Is this something I should do to my Taco, the diff drop that is..Is my Taco front end Diff and CV's different than the runners.. ?

jmurph

You mean ripped like this?

Don't know anything about the Porsche boots but my lift included the the 1" diff drop. First set of CV boots ripped 2 months after the lift was installed. I figured new ones would fair better since the first set were the originals (160k+ miles). Second set ripped 3 months after that. I have since removed the Revtek spacers.

04 Rocko Taco

Hey Murph, PM sent.