trannies, bumpers, brush guard, swaybars

Spinnbait · 04-26-2008, 04:31 PM

Here are a few items that I have collected due to upgrades. I need to get rid of them so all prices are flexible. Shipping is on the buyer. I am reluctant to ship the big items; however, I will for the right price or legwork. All prices are negotiable. Please feel free to ask questions. Located in Clarksville, TN 37043.

Great brushguard. Zero fitment issues. I am only selling it because I've built a bumper and about to SAS. - $200

Herculined front bumper. Only selling due to above reason. Herculiner is faded, but some black paint would bring back the shine. There are two holes in the top for foglights. - $75

http://i120.photobucket.com/albums/o...t/fbumper2.jpg

Herculined rear bumper. Once again, selling due to above reasons. The plastic top runner has a cut-out for a C.B. antenna as does the side of the bumper. The bottom-right of the bumper had a rip from my buddy's jeep putting its towhook in it. It's very hard to see and can be bent back in place with a crescent wrench (I may do it before it sells). The Herculiner is in the same condition as the front bumper. - $40

One front swaybar and one rear swaybar from a 1995 4Runner. They're in good condition. - $40 a piece.

R150F transmission and VF1A transfer case. The transmission has a crack in the housing. The transfer case needs a new rear output shaft seal. - Tranny - $50. T-case - $50. Both - $80.

TH350 2wd tranny. In great condition. Used in my sister's C10 until we put a 700R4 in for her commute to college. - $250

This ad is not displayed to registered members.
Register your free account today and become a member on Yotatech!

4RunnerFreedom · 04-26-2008, 05:00 PM

what gen 4runner does the brush gaurd fit? same goes for front and rear bumpers.

i'm interested if it works with an 88. shipping can be done cheaply via Grey Hound bus

Spinnbait · 04-26-2008, 07:47 PM

1995 4Runner. I'm not sure about your application. If the bolt holes for your front "tow hooks" are in the same location then it will bolt up. I do not have a problem shipping if the buyer takes care of the costs (in addition to the asking price).

Spinnbait · 04-27-2008, 05:23 PM

All prices are negotiable. I would like to get these outta my garage without just throwing them away...

Spinnbait · 04-28-2008, 04:39 PM

I don't really know what all of this is worth to anybody, so just throw out an offer if there is interest.

Spinnbait · 05-03-2008, 06:27 PM

This stuff can go cheaper than the listed price. Just throw out anything reasonable/ trades. I also have all 4 rear links and 2 CV's (will be 4 before long

).

Nebrkid817 · 05-05-2008, 04:36 PM

would that grille guard fit a '88 4X4 pickup??

mudtoy1986 · 05-05-2008, 06:08 PM

wel i know a lil about fit and the grill gaurd will fit 89 toy 95 truck and 90 to 95 runner thats direct fit but ya always could make it work with the 88 i sold my old brush gaurd to a guy with an 84 and i own a 90 p/u
hey on the trany how low will ya go and where ya located

Spinnbait · 05-05-2008, 06:36 PM

$50 is pretty low for a working transmission, despite the crack. I am in Clarksville, TN 37043 (Northern-middle TN).

attitude · 05-05-2008, 06:50 PM

Would you be willing to ship the brush guard? I am in Tulsa OK. markkcrane@hotmail.com

Spinnbait · 05-05-2008, 07:07 PM

Yeah, I can probably find a way to box it as long as you pay for the shipping.

Spinnbait · 05-14-2008, 08:52 PM

any interest?

terrybo3 · 05-15-2008, 10:50 AM

I live in Florida, but I'm from Nashville...could you drop the rear herculiner bumper off at a business in Metrocenter? What's your bottom dollar?

Spinnbait · 05-15-2008, 10:14 PM

$40 is pretty fair. I rarely go to nashville and it would cost me that in gas to go. I apologize.

wardriver · 05-16-2008, 04:29 AM

Do you know what brand that brush guard is? Also do you happen to know the weight and how wide it is? (for shipping costs)

Spinnbait · 06-30-2008, 09:19 PM

Hey guys, sorry if I missed any replies or pms. I've been a bit busy here lately. However, if anybody wants this stuff, just let me know what you're interested in and a fair price on both sides. I promise to be more responsive as I think I missed a few questions.

swaysidelife · 06-30-2008, 09:26 PM

ill buy the brush guard. shipping doesnt bother me at all.

Spinnbait · 07-02-2008, 03:06 PM

everything still up for grabs...

Spinnbait · 07-13-2008, 07:29 PM

Anybody?

Spinnbait · 07-20-2008, 11:00 PM

Does anybody want this stuff??

murdarunna19 · 09-21-2008, 10:15 PM

will the brushguard fit a 2000 runner? i may be interested

04-26-2008, 05:00 PM	#2 (permalink)
4RunnerFreedom Registered User Join Date: Apr 2008 Location: Ypsilanti, MI Posts: 75	what gen 4runner does the brush gaurd fit? same goes for front and rear bumpers. i'm interested if it works with an 88. shipping can be done cheaply via Grey Hound bus __________________ 88 4Runner 85 VW Scirocco Last edited by 4RunnerFreedom; 04-26-2008 at 05:01 PM.

04-26-2008, 07:47 PM	#3 (permalink)
Spinnbait Registered User Join Date: Apr 2006 Posts: 353	1995 4Runner. I'm not sure about your application. If the bolt holes for your front "tow hooks" are in the same location then it will bolt up. I do not have a problem shipping if the buyer takes care of the costs (in addition to the asking price). __________________ Cannondale Rush 3 carbon (my new baby) Surly 1x1 (my D/D) 1973 Schwinn cruiser (my shop bike)

04-27-2008, 05:23 PM	#4 (permalink)
Spinnbait Registered User Join Date: Apr 2006 Posts: 353	All prices are negotiable. I would like to get these outta my garage without just throwing them away... __________________ Cannondale Rush 3 carbon (my new baby) Surly 1x1 (my D/D) 1973 Schwinn cruiser (my shop bike)

04-28-2008, 04:39 PM	#5 (permalink)
Spinnbait Registered User Join Date: Apr 2006 Posts: 353	I don't really know what all of this is worth to anybody, so just throw out an offer if there is interest. __________________ Cannondale Rush 3 carbon (my new baby) Surly 1x1 (my D/D) 1973 Schwinn cruiser (my shop bike)

05-03-2008, 06:27 PM	#6 (permalink)
Spinnbait Registered User Join Date: Apr 2006 Posts: 353	This stuff can go cheaper than the listed price. Just throw out anything reasonable/ trades. I also have all 4 rear links and 2 CV's (will be 4 before long). __________________ Cannondale Rush 3 carbon (my new baby) Surly 1x1 (my D/D) 1973 Schwinn cruiser (my shop bike)

05-05-2008, 04:36 PM	#7 (permalink)
Nebrkid817 Registered User Join Date: Mar 2008 Location: Plattsmouth, Nebraska Posts: 58	would that grille guard fit a '88 4X4 pickup?? __________________ Nebrkid817 '88 4X4 Pickup Xtra Cab 2.4L 4cyl. 22RE w/ BFG All-Terrains All Stock

05-05-2008, 06:08 PM	#8 (permalink)
mudtoy1986 Registered User Join Date: Feb 2008 Posts: 139	wel i know a lil about fit and the grill gaurd will fit 89 toy 95 truck and 90 to 95 runner thats direct fit but ya always could make it work with the 88 i sold my old brush gaurd to a guy with an 84 and i own a 90 p/u hey on the trany how low will ya go and where ya located

05-05-2008, 06:36 PM	#9 (permalink)
Spinnbait Registered User Join Date: Apr 2006 Posts: 353	$50 is pretty low for a working transmission, despite the crack. I am in Clarksville, TN 37043 (Northern-middle TN). __________________ Cannondale Rush 3 carbon (my new baby) Surly 1x1 (my D/D) 1973 Schwinn cruiser (my shop bike)

05-05-2008, 06:50 PM	#10 (permalink)
attitude Registered User Join Date: May 2008 Location: Tulsa, OK Posts: 8	Would you be willing to ship the brush guard? I am in Tulsa OK. markkcrane@hotmail.com __________________ ----------------- 2001 F250 Platinum Edition 1986 Jeep CJ7 1994 Toyota 4Runner 4WD

05-05-2008, 07:07 PM	#11 (permalink)
Spinnbait Registered User Join Date: Apr 2006 Posts: 353	Yeah, I can probably find a way to box it as long as you pay for the shipping. __________________ Cannondale Rush 3 carbon (my new baby) Surly 1x1 (my D/D) 1973 Schwinn cruiser (my shop bike)

05-14-2008, 08:52 PM	#12 (permalink)
Spinnbait Registered User Join Date: Apr 2006 Posts: 353	any interest? __________________ Cannondale Rush 3 carbon (my new baby) Surly 1x1 (my D/D) 1973 Schwinn cruiser (my shop bike)

05-15-2008, 10:50 AM	#13 (permalink)
terrybo3 Registered User Join Date: Jan 2008 Location: Clearwater, Florida Posts: 130	I live in Florida, but I'm from Nashville...could you drop the rear herculiner bumper off at a business in Metrocenter? What's your bottom dollar? __________________ No more stock flex!!! :D Model: 1995 4Runner SR5 - Blue/Blue Engine/Performance: 3.0 L V6 3VZE, 5spd. Manual, no mods to the engine yet... Suspension: 2" Toytec balljoint spacers up front, 2" Lift Toytec coil springs in the rear Tires: 31x10.50 on stock wheels Misc: Extra Power Outlet Mod (3 total outlets), 200W Power Converter Mod(for the laptop), more to come

05-15-2008, 10:14 PM	#14 (permalink)
Spinnbait Registered User Join Date: Apr 2006 Posts: 353	$40 is pretty fair. I rarely go to nashville and it would cost me that in gas to go. I apologize. __________________ Cannondale Rush 3 carbon (my new baby) Surly 1x1 (my D/D) 1973 Schwinn cruiser (my shop bike)

05-16-2008, 04:29 AM	#15 (permalink)
wardriver Registered User Join Date: Jul 2007 Location: 26.3 road miles from the AT (VA) Posts: 319	Do you know what brand that brush guard is? Also do you happen to know the weight and how wide it is? (for shipping costs) __________________ Current Toyota -95' 4Runner - 3.0/AT - New HG - Yakima Rack - MT's - Hella's - GPS- Sat Radio - Onboard 120V Former Toyotas - 81' Trekker- 70' FJ40 - 76' FJ40 -72 FJ40 - 85 Hilux (ZERO options) Laptop CarPC Switch Mod \| DC to AC Inverter Switch Mod Staff Mod for nHunting.com a community forum for hunting/fishing/shooting

06-30-2008, 09:19 PM	#16 (permalink)
Spinnbait Registered User Join Date: Apr 2006 Posts: 353	Hey guys, sorry if I missed any replies or pms. I've been a bit busy here lately. However, if anybody wants this stuff, just let me know what you're interested in and a fair price on both sides. I promise to be more responsive as I think I missed a few questions. __________________ Cannondale Rush 3 carbon (my new baby) Surly 1x1 (my D/D) 1973 Schwinn cruiser (my shop bike)

06-30-2008, 09:26 PM	#17 (permalink)
swaysidelife Registered User Join Date: Jun 2008 Location: tacoma washington Posts: 32	ill buy the brush guard. shipping doesnt bother me at all. __________________ 1994 toyota pick up: k&n/isr mod ,2in cat back into a flow master 40, 7in lcd in dash,blue neons,12in memphis sub,powder coated skid plate. Last edited by swaysidelife; 06-30-2008 at 09:28 PM.

09-21-2008, 10:15 PM	#21 (permalink)
murdarunna19 Registered User Join Date: Sep 2008 Location: seattle Posts: 328	will the brushguard fit a 2000 runner? i may be interested __________________ Matt D 2000 4runner. supercharged, flowmaster, 3" toytec lift, sitting on BFG 33's. 2009 fj, arb bumper, warn winch, bfg ats, 2" lift, IPFs. 4runner Build - http://www.yotatech.com/f191/murdaru...thread-190270/

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Grill Guard/Brush Guard for Tacos	itsmeagain5789	03+ 4Runner/GX470, & 05+ Tacomas	2	03-20-2007 04:31 PM
Brush Guard/Taillight Guard Poll	LSUMatt1514	95.5-2004 Tacomas & 96-2002 4Runners	27	12-21-2006 01:39 PM
96-98 brush guard	FUZION	The Classifieds GraveYard	7	04-30-2006 03:33 PM
'03 4Runner brush guard/bumper guard	Lefty	95.5-2004 Tacomas & 96-2002 4Runners	1	04-29-2003 11:40 AM

07-02-2008, 03:06 PM	#18 (permalink)
Spinnbait Registered User Join Date: Apr 2006 Posts: 353	everything still up for grabs... __________________ Cannondale Rush 3 carbon (my new baby) Surly 1x1 (my D/D) 1973 Schwinn cruiser (my shop bike)

07-13-2008, 07:29 PM	#19 (permalink)
Spinnbait Registered User Join Date: Apr 2006 Posts: 353	Anybody? __________________ Cannondale Rush 3 carbon (my new baby) Surly 1x1 (my D/D) 1973 Schwinn cruiser (my shop bike)

07-20-2008, 11:00 PM	#20 (permalink)
Spinnbait Registered User Join Date: Apr 2006 Posts: 353	Does anybody want this stuff?? __________________ Cannondale Rush 3 carbon (my new baby) Surly 1x1 (my D/D) 1973 Schwinn cruiser (my shop bike)