Parting out 83 pickup
#1
Registered User
Thread Starter
Join Date: Apr 2006
Location: Leesburg, VA
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
Parting out 83 pickup
Name:Collin
Location:Ashburn,VA
Description:
**TRUCK IS SOLD**
I recently bought this truck off an old friend. I was originally planning on taking the solid front axle parts off for my 88, however i recently sold my 88 so i have no use for this truck. He daily drove this thing for a year or two then a few months back the motor started making a "bad noise" and he turned it off before it made anything worse(he said oil pump, i have not verified that yet, it sat for months and has some rigged starting system with speaker wire going to the starter:face palm: ) The bed is toast, the cab is decent i suppose it has a few patches on it where rust was and it is rusted a bit below the doors. Motor is a 22r, it is a 4wd truck. It has power steering, i think everythings there i will double check tomorrow. fenders are in decent shape as is the hood and doors. it has the "vented" windows. Frame is decent, does have a little rust tho and front shock mounts are broken off. it has a small body lift on 33 generic tires. has aftermarket wheels as wheel(polished wagon wheels) i believe 15x10's. not much left of the interior, does have nice seats though(not sure what they came out of they are tan/brown) i will get pics up asap, trying to part the big stuff last(wheels, axles) however if i get a very serious buyer for those i could remove them. i would prefer not to ship the big stuff however if the buyer wants to pay shipping, i will possibly ship. If someone is interested in the truck as a whole, feel free to make me an offer. again i know this thread isn't worth much without pics so i will try to get some up tomorrow. Pm or post if you have any questions.
thanks
Collin
Location:Ashburn,VA
Description:
**TRUCK IS SOLD**
I recently bought this truck off an old friend. I was originally planning on taking the solid front axle parts off for my 88, however i recently sold my 88 so i have no use for this truck. He daily drove this thing for a year or two then a few months back the motor started making a "bad noise" and he turned it off before it made anything worse(he said oil pump, i have not verified that yet, it sat for months and has some rigged starting system with speaker wire going to the starter:face palm: ) The bed is toast, the cab is decent i suppose it has a few patches on it where rust was and it is rusted a bit below the doors. Motor is a 22r, it is a 4wd truck. It has power steering, i think everythings there i will double check tomorrow. fenders are in decent shape as is the hood and doors. it has the "vented" windows. Frame is decent, does have a little rust tho and front shock mounts are broken off. it has a small body lift on 33 generic tires. has aftermarket wheels as wheel(polished wagon wheels) i believe 15x10's. not much left of the interior, does have nice seats though(not sure what they came out of they are tan/brown) i will get pics up asap, trying to part the big stuff last(wheels, axles) however if i get a very serious buyer for those i could remove them. i would prefer not to ship the big stuff however if the buyer wants to pay shipping, i will possibly ship. If someone is interested in the truck as a whole, feel free to make me an offer. again i know this thread isn't worth much without pics so i will try to get some up tomorrow. Pm or post if you have any questions.
thanks
Collin
Last edited by 1stgenrnrdude; 04-28-2013 at 03:30 PM.
#6
Registered User
I need the center overhead dome light and mirror assembly if they are in good shape. Also, if it still has the ash tray and bezel that surrounds the ash tray and radio, I need that as well.
If the grille is the same as an '81, how much for the grille and screws and clips providing the grille is not broken?
If the door cylinder locks the ignition cylinder lock all work and match, how much for them?
Does it have the throttle pedal? I need one of those as well.
Let me know ASAP.
Thanks,
Doug
If the grille is the same as an '81, how much for the grille and screws and clips providing the grille is not broken?
If the door cylinder locks the ignition cylinder lock all work and match, how much for them?
Does it have the throttle pedal? I need one of those as well.
Let me know ASAP.
Thanks,
Doug
Last edited by 99SC4Runner; 12-22-2012 at 01:40 PM.
#7
Registered User
Thread Starter
Join Date: Apr 2006
Location: Leesburg, VA
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
I need the center overhead dome light and mirror assembly if they are in good shape. Also, if it still has the ash tray and bezel that surrounds the ash tray and radio, I need that as well.
If the grille is the same as an '81, how much for the grille and screws and clips providing the grille is not broken?
If the door cylinder locks the ignition cylinder lock all work and match, how much for them?
Does it have the throttle pedal? I need one of those as well.
Let me know ASAP.
Thanks,
Doug
If the grille is the same as an '81, how much for the grille and screws and clips providing the grille is not broken?
If the door cylinder locks the ignition cylinder lock all work and match, how much for them?
Does it have the throttle pedal? I need one of those as well.
Let me know ASAP.
Thanks,
Doug
Trending Topics
#14
Registered User
Thread Starter
Join Date: Apr 2006
Location: Leesburg, VA
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
#17
Registered User
Thread Starter
Join Date: Apr 2006
Location: Leesburg, VA
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
#18
Registered User
Thread Starter
Join Date: Apr 2006
Location: Leesburg, VA
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
I'm also trying to keep the hinges with the doors.