parting 86 turbo toy

85yoda · 11-28-2007, 01:13 PM

I am parting out a 1986 toyota turbo 4x4. I am keeping the motor and all of the wiring harness. I am selling the axles, or differentials. They should be the 3.42 gears. I will sell other stuff too.I am in central minnesota. If interested send a pm or email at flip660@yahoo.com thanks

Phil

This ad is not displayed to registered members.
Register your free account today and become a member on Yotatech!

**DeathCougar** · 11-28-2007, 01:39 PM

3.42 gears? I dont think so. All turbos ran 4.10 gearing.

4banginRunner · 11-28-2007, 01:41 PM

Quote:

Originally Posted by DeathCougar

3.42 gears? I dont think so. All turbos ran 4.10 gearing.

not turbo 4runners with the auto...4.88s

Djlarroc · 11-28-2007, 02:27 PM

85yoda, if you have the 4:88's let me know how much.

85yoda · 11-28-2007, 02:45 PM

I just went out and looked, there are no tags on either axle. So I did the old spin and count technique. You do one full revolution of the tire and count the driveshaft revolutions. Then double the driveshaft revs. I counted 1 and almost 3/4 turns which doubled is right around 3.42. If you want I can give you axle codes or whatever numbers you want off of the tags and you can call a yota dealer and ask him. thanks

Phil

Djlarroc · 11-28-2007, 03:29 PM

Ya, pass em on and I'll research them. I hate to drive my truck on 3:42's lol... especially on 33's. I doubt it would turn them... Thanks for checking.

turboyota1 · 11-28-2007, 03:40 PM

My turbo truck has 3:90's

**DeathCougar** · 11-28-2007, 04:08 PM

Quote:

Originally Posted by turboyota1

My turbo truck has 3:90's

Thats cause you have a 2WD. No 4x4 turbo ever came with anything but a 4.10 ratio rearend. (in the US)

Quote:

Originally Posted by 85yoda

I am parting out a 1986 toyota turbo 4x4

You stated it was 4x4. So unless its been changed, its a 4.10. Thats the ONLY OPTION they made for 85-88 Turbo trucks and 4runners.

Quote:

Originally Posted by 4banginRunner

not turbo 4runners with the auto...4.88s

The 4.88 ratio was NEVER an option until 1992. Where do you guys get your information from? In terms of STOCK equipment, you are wrong.

4banginRunner · 11-28-2007, 04:57 PM

Quote:

Originally Posted by DeathCougar

The 4.88 ratio was NEVER an option until 1992. Where do you guys get your information from? In terms of STOCK equipment, you are wrong.

a guy in town has a 87 Turbo 4runner with the auto, 1 owner, he bought it off the showroom floor new, i was in the local 4x4 shop when he was doing his lift,bumpers, regear, etc, we counted teeth and they were the 4.88 ratio (i 4get the teeth #'s it was a few years ago) he sold them on ebay as 4.88s

thats where i got my info from, and it is safe to say that was stock equipment being the 1st time the diff was pulled out ever

**DeathCougar** · 11-28-2007, 05:04 PM

Quote:

Originally Posted by 4banginRunner

a guy in town has a 87 Turbo 4runner with the auto, 1 owner, he bought it off the showroom floor new, i was in the local 4x4 shop when he was doing his lift,bumpers, regear, etc, we counted teeth and they were the 4.88 ratio (i 4get the teeth #'s it was a few years ago) he sold them on ebay as 4.88s

thats where i got my info from, and it is safe to say that was stock equipment being the 1st time the diff was pulled out ever

Then you either A. Counted the teeth wrong or B. it was switched out. turbo Trucks NEVER CAME WITH 4.88 DIFFS. Ever.

The Turbo autos used the 4.10 diff just the same as all the other turbo trucks and 4runners. In 1987, the only TWO options for 4x4 diffs were 4.10 and 4.30; the non-turbo autos got the 4.30 diffs, and all MT and Turbos had 4.10 ratio rear ends.

I wonder if the shop messed up and put his 4.10 gears back in, and he sold his new 4.88's lol. That would be bad times.
Perhaps your friend really did have 4.88 diffs, but I can garuntee you 100% they did not originally come stock from his 1987 4Runner.

85yoda · 11-28-2007, 05:15 PM

I have read in a few articles in past magazines, how to build a toy, how to but a toy, and what came in your toy, that turbo trucks came with a 3.42 gear ratio. I'm not making this up.I will pull the 3rd member this weekend and find out for sure. I will even photograph it and put it on here. I did give the vin to a member on here and he will look into it. I don't know where there are any more tags. If you know of some more tag locations feel free to let me know. thanks.

Phil

**DeathCougar** · 11-28-2007, 05:36 PM

Quote:

Originally Posted by 85yoda

I have read in a few articles in past magazines, how to build a toy, how to but a toy, and what came in your toy, that turbo trucks came with a 3.42 gear ratio. I'm not making this up.I will pull the 3rd member this weekend and find out for sure. I will even photograph it and put it on here. I did give the vin to a member on here and he will look into it. I don't know where there are any more tags. If you know of some more tag locations feel free to let me know. thanks.

Phil

3.42 was available in 2wd trucks only.

Look under the hood at the info plate (silver, center of firewall) and give me the info on it. There will be a part that says A/TM. That is the Axle/Trans mission code. Type it up, and I will tell you what you have.

btw you DO have a 4x4 right?!

85yoda · 11-28-2007, 08:41 PM

Ok went out and looked at it here are the numbers 033 FZ41 G292 R151F
Model # RNGL MBZA. Yes it is a 4x4. I have been looking for this truck a long time and I found a guy that has another. Very reasonable too. If you would look this up and let me know it would be greatly appreciated, thanks

Phil

**DeathCougar** · 11-28-2007, 09:05 PM

ok, here goes:

033 is Truck color code (silver?)
FZ41 is interior color and pattern code
G292 is diff code (4.10)
R151F is trans code (4 cyl turbo gear drive forward shift case)

As for the diff:

G=8.0" All 4x4 4Runners and Pickups
29= 4.10 Gear ratio
2= 2 pinion diff

In order to get a 3.42 ratio, you would have to have a G382 or G384 axle code.

SO, you can clearly see, the truck has/had 4.10 gearing.

btw the info is here: http://toyota.off-road.com/toyota/ar....jsp?id=274535
and here: http://www.toysport.com/Technical%20...ifications.htm
and here: http://www.brian894x4.com/Gearratiosanddiffs.html

Hayes · 11-28-2007, 09:10 PM

Are you selling the t-case?

85yoda · 11-28-2007, 09:13 PM

Thanks for the help. I do appreciate it. The axles do have 4.10 gears. But who needs 4.10s it seems like everyone has a set of them around somewhere. thanks again.

Phil

**DeathCougar** · 11-28-2007, 09:14 PM

Sorry 033 is WHITE my bad.
And you have the Tan based on the FZ41 code as well

85yoda · 11-28-2007, 09:14 PM

The trans and case are for sale. I am just going to use mine in my 85. Make me an offer. send a pm or email when you offer please. thanks.
Phil

**DeathCougar** · 11-28-2007, 09:15 PM

Quote:

Originally Posted by 4banginRunner

a guy in town has a 87 Turbo 4runner with the auto, 1 owner, he bought it off the showroom floor new, i was in the local 4x4 shop when he was doing his lift,bumpers, regear, etc, we counted teeth and they were the 4.88 ratio (i 4get the teeth #'s it was a few years ago) he sold them on ebay as 4.88s

thats where i got my info from, and it is safe to say that was stock equipment being the 1st time the diff was pulled out ever

4Bangin: Can you get the axle code from his truck?

4banginRunner · 11-29-2007, 12:35 PM

Quote:

Originally Posted by DeathCougar

4Bangin: Can you get the axle code from his truck?

i'll try and get ahold of him this weekend

Djlarroc · 11-29-2007, 12:46 PM

Glad to see you found your code. Good job DeathCougar.

4banginRunner · 11-29-2007, 06:37 PM

DeathCougar: saw the guy while gettin gas today, chased him down lol, axle code on the door jamb is G294, making it 4.10s, but he also told me that in the mid 90's he "smoked the front diff" and got matching gears out of a 94-95 4runner, just happened to turn out being 4.88s (he said he did not know they were 4.88s at the time)

so i do stand corrected

sorry for the confusion

jordan7118 · 11-29-2007, 07:51 PM

I emailed you earlier this week. Get a chance to think about it yet? Shoot me an email back when you get the chance. jordansteinhaus AT gmail DOT com. Thanks!

Jordan

**DeathCougar** · 11-29-2007, 10:51 PM

lol. Its ok my son. You challenged the master, and lost. It is ok, with time, you shall learn.

Flannelman · 11-30-2007, 09:27 PM

Does the truck have manual hubs? and if so how much?

11-28-2007, 02:27 PM	#4 (permalink)
Djlarroc Contributing Member Join Date: Jun 2007 Location: Denver, CO Posts: 1,322	85yoda, if you have the 4:88's let me know how much. __________________ '89 4Runner: 22RE 5spd, 4:10s w/202K, 16x8 w/265-75 MT, Diamond headlights, Aisin hubs, Tortis' custom roll on paint job, Home made bikini, 1" Body Lift, 1.25" greasable lift shackles, TG Sliders, 1.5" BJ spacers, Rust is gone! - SOLD! '00 4Runner: Locked F/R - sold!

11-28-2007, 03:29 PM	#6 (permalink)
Djlarroc Contributing Member Join Date: Jun 2007 Location: Denver, CO Posts: 1,322	Ya, pass em on and I'll research them. I hate to drive my truck on 3:42's lol... especially on 33's. I doubt it would turn them... Thanks for checking. __________________ '89 4Runner: 22RE 5spd, 4:10s w/202K, 16x8 w/265-75 MT, Diamond headlights, Aisin hubs, Tortis' custom roll on paint job, Home made bikini, 1" Body Lift, 1.25" greasable lift shackles, TG Sliders, 1.5" BJ spacers, Rust is gone! - SOLD! '00 4Runner: Locked F/R - sold!

11-28-2007, 09:10 PM	#15 (permalink)
Hayes Registered User Join Date: Apr 2006 Location: Aurora, CO Posts: 1,884	Are you selling the t-case? __________________ Obama is an acronym. OBAMA = One Big Ass Mistake, America

11-29-2007, 12:46 PM	#21 (permalink)
Djlarroc Contributing Member Join Date: Jun 2007 Location: Denver, CO Posts: 1,322	Glad to see you found your code. Good job DeathCougar. __________________ '89 4Runner: 22RE 5spd, 4:10s w/202K, 16x8 w/265-75 MT, Diamond headlights, Aisin hubs, Tortis' custom roll on paint job, Home made bikini, 1" Body Lift, 1.25" greasable lift shackles, TG Sliders, 1.5" BJ spacers, Rust is gone! - SOLD! '00 4Runner: Locked F/R - sold!

11-29-2007, 06:37 PM	#22 (permalink)
4banginRunner Registered User Join Date: Dec 2005 Location: With all the Ho Butts in Mount Carmel, PA Posts: 1,706	DeathCougar: saw the guy while gettin gas today, chased him down lol, axle code on the door jamb is G294, making it 4.10s, but he also told me that in the mid 90's he "smoked the front diff" and got matching gears out of a 94-95 4runner, just happened to turn out being 4.88s (he said he did not know they were 4.88s at the time) so i do stand corrected sorry for the confusion __________________ 87 Toyota 4Runner 22RE--5spd swap (W56)--4.56s--BJ spacers--Pro Comp Stage II 4" bracket lift--63" Chevys w/2" blocks--40 series--late style steering box swap--BudBuilt Dual Case X-member--V6 calipers--32s--MC rear bumper--SAS parts collecting time... *79 Toyota Longbed 4x4* Frame-off Resto time. *04 GMC Sierra 1500* the DD

11-28-2007, 02:45 PM	#5 (permalink)
85yoda Registered User Join Date: Dec 2006 Posts: 89	I just went out and looked, there are no tags on either axle. So I did the old spin and count technique. You do one full revolution of the tire and count the driveshaft revolutions. Then double the driveshaft revs. I counted 1 and almost 3/4 turns which doubled is right around 3.42. If you want I can give you axle codes or whatever numbers you want off of the tags and you can call a yota dealer and ask him. thanks Phil

11-28-2007, 03:40 PM	#7 (permalink)
turboyota1 Registered User Join Date: Oct 2007 Posts: 129	My turbo truck has 3:90's

11-28-2007, 05:15 PM	#11 (permalink)
85yoda Registered User Join Date: Dec 2006 Posts: 89	I have read in a few articles in past magazines, how to build a toy, how to but a toy, and what came in your toy, that turbo trucks came with a 3.42 gear ratio. I'm not making this up.I will pull the 3rd member this weekend and find out for sure. I will even photograph it and put it on here. I did give the vin to a member on here and he will look into it. I don't know where there are any more tags. If you know of some more tag locations feel free to let me know. thanks. Phil

11-28-2007, 08:41 PM	#13 (permalink)
85yoda Registered User Join Date: Dec 2006 Posts: 89	Ok went out and looked at it here are the numbers 033 FZ41 G292 R151F Model # RNGL MBZA. Yes it is a 4x4. I have been looking for this truck a long time and I found a guy that has another. Very reasonable too. If you would look this up and let me know it would be greatly appreciated, thanks Phil

11-28-2007, 09:13 PM	#16 (permalink)
85yoda Registered User Join Date: Dec 2006 Posts: 89	Thanks for the help. I do appreciate it. The axles do have 4.10 gears. But who needs 4.10s it seems like everyone has a set of them around somewhere. thanks again. Phil

11-28-2007, 09:14 PM	#18 (permalink)
85yoda Registered User Join Date: Dec 2006 Posts: 89	The trans and case are for sale. I am just going to use mine in my 85. Make me an offer. send a pm or email when you offer please. thanks. Phil

11-29-2007, 07:51 PM	#23 (permalink)
jordan7118 Registered User Join Date: Aug 2007 Posts: 15	I emailed you earlier this week. Get a chance to think about it yet? Shoot me an email back when you get the chance. jordansteinhaus AT gmail DOT com. Thanks! Jordan

11-30-2007, 09:27 PM	#25 (permalink)
Flannelman Registered User Join Date: May 2005 Location: Grand Forks, ND Posts: 67	Does the truck have manual hubs? and if so how much? __________________ 97 T-100 SR5 4x4 5spd Ext Cab 100k and counting Forest Green metallic Aisin Hubs

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Parting 87 Turbo Truck	bjack	The Classifieds GraveYard	44	11-25-2007 07:49 PM
85 turbo 4R FLIPPED parting out SOCAL	indica4r	The Classifieds GraveYard	37	04-29-2007 08:18 AM
(2) 86 toy sb 4x parting out	88rnr86up	The Classifieds GraveYard	6	03-13-2007 03:47 PM
Parting out 2 4runners and 1 turbo truck	bjack	The Classifieds GraveYard	33	10-12-2006 07:31 AM