Parting 86 4Runner (Tempe, AZ)
#1
Registered User
Thread Starter
Join Date: Apr 2008
Location: Tempe, AZ
Posts: 471
Likes: 0
Received 0 Likes
on
0 Posts
Parting 86 4Runner (Tempe, AZ)
Hey guys,
All prices are OBO!
Photo album can be found here!
Contact Info
Name: Nic
Location: Downtown Tempe, AZ near ASU
Contact: reply to this thread or PM me
1986 4Runner 4x4 22RE
Truck has been sold, I only have a few parts remaining! See below!
Aftermarket Parts
All aftermarket parts have less than 2,000mi on them, so they're practically brand new. Only taken out to the trails once or twice.
Front Range Off-Road Full Floater rear axles
This is fully assembled, bolt on and go. No parking brake (I used 4Runner front calipers instead of the Celica/Supra calipers because the celica/supra calipers were impossible to find at the time). I paid roughly $1600 brand new.
Price: $1000
Old Man Emu Torsion Bars
Product Link
These are practically brand new, only 2,000mi on them.
Price: $100
Thanks for looking! Feel free to haggle (reasonably) and ask any questions!
All prices are OBO!
Photo album can be found here!
Contact Info
Name: Nic
Location: Downtown Tempe, AZ near ASU
Contact: reply to this thread or PM me
1986 4Runner 4x4 22RE
Truck has been sold, I only have a few parts remaining! See below!
Aftermarket Parts
All aftermarket parts have less than 2,000mi on them, so they're practically brand new. Only taken out to the trails once or twice.
Front Range Off-Road Full Floater rear axles
This is fully assembled, bolt on and go. No parking brake (I used 4Runner front calipers instead of the Celica/Supra calipers because the celica/supra calipers were impossible to find at the time). I paid roughly $1600 brand new.
Price: $1000
Old Man Emu Torsion Bars
Product Link
These are practically brand new, only 2,000mi on them.
Price: $100
Thanks for looking! Feel free to haggle (reasonably) and ask any questions!
Last edited by NicCantDecide; 08-12-2013 at 07:42 AM. Reason: updated sale items
#5
Registered User
Thread Starter
Join Date: Apr 2008
Location: Tempe, AZ
Posts: 471
Likes: 0
Received 0 Likes
on
0 Posts
#7
Registered User
Thread Starter
Join Date: Apr 2008
Location: Tempe, AZ
Posts: 471
Likes: 0
Received 0 Likes
on
0 Posts
I pulled the full floater stuff out of the axle housing on the truck and put the stock semi-floating drums back on.
The rear axle has a 4cyl diff with a lock-rite locker and stock gears. It's setup with Trail-Gear spring perches for my lift kit, so it will not be a direct swap for a stock truck. Not sure on the gearing for 1986, but tire size is 29" and its a 5speed if that helps.
If you're interested in the whole package with the axle housing, diff, and full floating axles, send me a PM and we can discuss it.
Trending Topics
#9
Registered User
Thread Starter
Join Date: Apr 2008
Location: Tempe, AZ
Posts: 471
Likes: 0
Received 0 Likes
on
0 Posts
Thanks!
#11
Registered User
Thread Starter
Join Date: Apr 2008
Location: Tempe, AZ
Posts: 471
Likes: 0
Received 0 Likes
on
0 Posts
#15
Registered User
Thread Starter
Join Date: Apr 2008
Location: Tempe, AZ
Posts: 471
Likes: 0
Received 0 Likes
on
0 Posts
#18
Registered User
Thread Starter
Join Date: Apr 2008
Location: Tempe, AZ
Posts: 471
Likes: 0
Received 0 Likes
on
0 Posts