Front Hitch Reciver **sold**
#1
Registered User
Thread Starter
iTrader: (2)
Join Date: Oct 2009
Location: Centeral Willamette Valley Oregon
Posts: 1,044
Likes: 0
Received 5 Likes
on
5 Posts
Front Hitch Reciver **sold**
Custom built front hitch. I built this for my 4runner so I would have a place to use a multi mount winch platform. It is all Tig welded together. I have painted it with grey primer. It was a rear hitch cut down and then plated so it will bolt up to the front of an IFS frame.
I am asking $125 plus shipping.
I am located in Oregon 97361
I am asking $125 plus shipping.
I am located in Oregon 97361
#2
Registered User
Join Date: Aug 2008
Location: Central CA
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
I realize this is off topic so if there is another existing thread please let me know, but I've considered putting a front winch mount and not done it yet. Why did you start to do it and then sell the mounting point?
#3
Registered User
Thread Starter
iTrader: (2)
Join Date: Oct 2009
Location: Centeral Willamette Valley Oregon
Posts: 1,044
Likes: 0
Received 5 Likes
on
5 Posts
I pulled it off for three reasons.
1. I installed a 1uz engine and needed a body lift to clear the engine. I didn't like that after the lift it Hung down past the valance so much. Stock it was nice and tucked up out of the way after it looked funny.
2. I have a straight axle getting ready to be installed. The front spring hanger is welded in where this thing sits. It won't fit once sas'ed
3. I have a tubing bender, welder, press, ect. I plan on building myself a front winch bumper.
Hope that helps. If I hadn't strayed from a stock rig I wouldn't be selling this. I loved the functionality it has served.
1. I installed a 1uz engine and needed a body lift to clear the engine. I didn't like that after the lift it Hung down past the valance so much. Stock it was nice and tucked up out of the way after it looked funny.
2. I have a straight axle getting ready to be installed. The front spring hanger is welded in where this thing sits. It won't fit once sas'ed
3. I have a tubing bender, welder, press, ect. I plan on building myself a front winch bumper.
Hope that helps. If I hadn't strayed from a stock rig I wouldn't be selling this. I loved the functionality it has served.
Last edited by 85toyman; 02-15-2013 at 07:00 AM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
FS[GreatLakes]: Toyota collection part out
88sasturbotoy
Axles - Suspensions - Tires - Wheels
2
08-11-2015 01:56 AM
coffey50
Offroad Tech
17
07-28-2015 10:55 AM
Steven.m.paulk
86-95 Trucks & 4Runners (Build-Up Section)
3
07-24-2015 01:44 PM
scottyg486
Offroad Tech
3
07-19-2015 05:34 PM