Okiyota

Checking to see if there would be any interest in this hood, i know a lot of people want them and i have read a lot of posts on here stating that they are near impossible to come buy.... I have a brand new one that hasnt even been painted yet, still in primer black from the factory, does not have the little "scoop insert" deal, but those can be picked up from a dealership anywhere. Not really sure what people are willing to pay for these, looking for offers. It is in Colorado Springs, and could possibly be shipped, but due to the size i'm sure it would cost a small fortune, so pick up would be better.

This ad is not displayed to registered members. Register your free account today and become a member on Yotatech!

HaveBlue

I'd be interested. And I'm in Colorado. I could pickup. As far as an offer - $150?

__________________
Alan
1996 Supercharged 4Runner Limited


Hi Altitude 4Lo A 4WD club for Colorado and surrounding states

X-AWDriver

The buyer will need another $150 for the pieces in the insert but definetly should go pretty quick.

__________________
'99 4Runner Highlander 4wd
E-locker,rear diff and deckplate mod * 265/75/16 Nitto TerraGrapplers * Yakima Load Warrior rack * clear corners/signals * Tacoma skidplate * Silverstar lamps/fogs
Alpine CDA-9831,Bazooka EL Series 250w amp,MTX 10" sub

Okiyota

WOW!!! Really that expensive huh?? Cant believe that!! (i really do, but its crazy)

rocket

What do the "scoop insert" parts consist of?
I'm assuming the hood just has a plain open hole in the scoop, right?

__________________
'96-'02
gone: '92

X-AWDriver

There's a list on a thread of all the dealer only parts you will need so do a search or I'll try to dig it up later.

__________________
'99 4Runner Highlander 4wd
E-locker,rear diff and deckplate mod * 265/75/16 Nitto TerraGrapplers * Yakima Load Warrior rack * clear corners/signals * Tacoma skidplate * Silverstar lamps/fogs
Alpine CDA-9831,Bazooka EL Series 250w amp,MTX 10" sub

FUZION

All that is really needed is the scoop that fits in the hole and the wire mesh. Under $100 for both.

__________________
Scooped 97 Black 4Runner


*Black 99' Headlights, corner lights + taillights *Tundra Calipers/Sequoia Brembos *17" Black Sequoia wheels/ 32" Michellins *Hilux Surf Emblem *Taco Skid Plate *Waag Guard *Black Nerf Bars
*5% Tint *Clarion Dxz545mp *2 12" Fosgate Punch Z *ProfileC400 Amp *Red glow guages

frodin1

Is it really a OEM hood ir is it aftermarket? There's a list of about 15 parts listed on 4x4 wire that you'll need to finish the hood, and personally, I've found the hood pretty cheap without all the stuff. $120 if you dont mind aftermarket.

__________________
Pioneer HU, Audiobahn 10.100watt Sub, Sirius, Cobra NWWXST CB W/ K40, Wolo Air horn, K&N FIPK,Tokico Trekmasters,Tundra TRDs, Revtec spacers w/extended studs,Energy bushings on steering rack /front swaybar,SS front diff. drop kit w/skid plate mod,OME 890 Rears with OEM LC Tokicos,Ebrake ext. bracket, BFG AT/KO's, ProComp 1078 Alloys, Magnaflow SS muffler, Hayden 1678 Tranny Cooler, 85watt Amber fogs, 7 Way R/V plugin.

X-AWDriver

Look at post #7 for parts #s.

http://www.yotatech.com/f2/hood-scoop-75259/

__________________
'99 4Runner Highlander 4wd
E-locker,rear diff and deckplate mod * 265/75/16 Nitto TerraGrapplers * Yakima Load Warrior rack * clear corners/signals * Tacoma skidplate * Silverstar lamps/fogs
Alpine CDA-9831,Bazooka EL Series 250w amp,MTX 10" sub

frodin1

I looked up just the correct hood liner and the actual scoop part. The liner is $130, and the scoop is $80 that's still not including all the proper hardware other parts. These prices were from TRDp4u. Which is usually cheaper than most.

__________________
Pioneer HU, Audiobahn 10.100watt Sub, Sirius, Cobra NWWXST CB W/ K40, Wolo Air horn, K&N FIPK,Tokico Trekmasters,Tundra TRDs, Revtec spacers w/extended studs,Energy bushings on steering rack /front swaybar,SS front diff. drop kit w/skid plate mod,OME 890 Rears with OEM LC Tokicos,Ebrake ext. bracket, BFG AT/KO's, ProComp 1078 Alloys, Magnaflow SS muffler, Hayden 1678 Tranny Cooler, 85watt Amber fogs, 7 Way R/V plugin.

Okiyota

Wow, seems like this might be more expensive than originally thought.

I guess i'll just hang on to it and slowly get all the parts needed to make it complete. Thanks for the info everyone.