fullwidthyotaon40s

iTrader: (2)

Posting another vehicle that's getting parted out to cover costs for parts on my '85 4runner resto! Only things I'm keeping are engine and trans. It was in a rollover, damaging things like fenders, tailgate, rear bumper, door shells, ... It was loaded except for clinometer. It has power windows and mirrors Here is a partial list:

- Door Panels
- Dash
- Door motors (good)/ windows
- Pass power mirror
- Bucket seats
- Rear seats (mismatched fabric from dif year?)
- seatbelts
- lower door trim
- good center of chrome grill(headlight surrounds too damaged)
- Tailgate motor/pieces
- Front bumper w/o ends
- Misc. Trim & Lots of interior
- Tail lights

Probably will be adding a few more parts, these are just off the top of my head, feel free to ask! because this will hopefully be torn down this weekend and scrapped

22RE parts:
- MAF/ box (2 or 3)
- Intake tube from MAF to throttle
- Charcoal canisters
- 22re ECU
- Power steering boxes

Utah4Runner86

iTrader: (1)

Are the interior door skins intact with the power controls and such? If so I'm interested, if you're willing to ship.

fullwidthyotaon40s

iTrader: (2)

I still have everything from the door panels. They had power window switches and power locks. I will ship parts, but will have to check a price to ship the door panels because the '88 panels are so big.

wavekayaker

Do you have the rubber interior boot that went around the transmission and transfer case?

BigBluePile

iTrader: (3)

How much for the cluster?

RMA

i need the gas door if the hindge is in good shape ...shipped to san jose 95122

space-junk

iTrader: (1)

door switches, clock(if its in good shape) and switches(with pigtails) from the dash (decklamp, windows, etc)

Utah4Runner86

iTrader: (1)

They are big. They're also hard find around here.

I'm in 84044, if you're willing to calculate shipping for me.

fullwidthyotaon40s

iTrader: (2)

Alright everyone, it has been a long weekend, but the runner is about ready for the scrapper and most parts are pulled ! All pms have been returned (I hope!) and I will try to post better pics today of requested parts that are pulled and get shipping quotes. Forgot to mention I'm saving the parts for a 5spd swap (shifter boot, plastic trim, cluster, shifters).

Utah4Runner86

iTrader: (1)

Didn't hear back, did you forget me or are those panels bigger than you wanna ship?

fullwidthyotaon40s

iTrader: (2)

I can't find a box to ship them in. Im gonna have to buy/make one.

Utah4Runner86

iTrader: (1)

Don't sweat it then, I'll keep looking local. Thanks for trying.

tyes

looking for rubber boot that goes over the 5spd and TC shifter to the floor... shipped to 93725

Hothondaguy

How much for the Front manual hubs locking hubs? with all hardware including spindle nuts and washers?

Shipped to 93543

thanks
Jeromey

Outsane

how much for the power mirror, switches and wiring? and power door locks and wiring

fullwidthyotaon40s

iTrader: (2)

check above

fullwidthyotaon40s

iTrader: (2)

PMs sent!

frm_808

iTrader: (1)

pm sent

Mashashin

PM sent as well!!

MADMAXJE

what kinda hubs are those an how much for em ?